Full number will be 0x00003EA5, omitted those zeros for convenience.
Little endian representation will be A5 3E 00 00.
Converting to base64: pT4AAA==.
I don't have such a link, anyway I don't think sharing such links is allowed here :P
Happy to help tho :)
You should not have that webarchive file in Clover/ACPI/patched.
I2C1 disabler is still there, I think I've suggested to remove it at least twice already...
Fixes to config.plist I suggested (FixHeaders, PluginType, ...) are not there... Please read through the posts in the threads and apply...
As Feartech said, you need to compile the .dsl before using it.
As the page source is .dsl, you must download with the .dsl extension. After doing that, open MaciASL and save as ACPI machine language binary (.aml).
Once you have the compiled file, replace the SSDT I mentioned with that one...
Remove OsxAptioFix2Drv-64.efi, EmuVariableUefi.efi. Use AptioMemoryFix instead.
Why do you have AppleRTC in your Clover kexts folder? That's wrong...
Read the Clover laptop guide, follow it and use the config.plist linked from the guide. Use SourceForge Clover release instead of RehabMan...
I mean both.
Interesting. WhateverGreen handles this rename so it is possible to remove from config.plist.
Remove your SSDT-PNLF-COFFEELAKE, get it from here:
Do not disable _OSI -> XOSI rename. It's an...
Removing VoodooI2C was just for testing. I don't expect you to simply not use it.
SSDT-XCPM-SBpr00 can be removed when injecting PluginType via Clover.
You still have the I2C1 disabler SSDT, you should've removed it.
Using someone else's setup isn't always a good idea. It must be reliable and...
I decompiled here your DSDT with your SSDTs (Using iasl -dl DSDT.aml SSDT*.aml), got no error besides those 2 lines. No need to use the decompiled SSDTs, it's just to decompile the DSDT easily.
Make sure you're using...
You'll probably want to sort that out :P
No reason installing to a different drive/partition will help...
Once you finish setting the OS up, upload a new troubleshooting archive.
Cool. Tho the ACPI path is strange. The first character doesn't really belong...
I'd look under 'Keyboards'.
You should patch your trackpad for GPIO interrupts (touchscreen has APIC pin 0x1F, which is fine).
Just put this in _CRS:
Return (ConcatenateResTemplate (I2CM (I2CX, BADR, SPED), SBFG))
Apparently VoodooI2C doesn't output to the kernel log. Can you install VoodooI2C + VoodooI2CHID to /L/E...
Some notes about your config.plist:
All of your DSDT 'fixes' can probably be removed - FixHPET, FixIPIC, FixRTC and FixTMR.
FixHeaders can help when enabled.
To have a proper power management you should enable PluginType injection.
What's that "ACPI Patch" find/replace pattern?
Is there a...
Once you make changes, it's usually best to attach a new troubleshooting archive.
The latest archive you uploaded has 18 panic logs from the same day (July 17, yesterday).
So you don't have the 'Boot every 2 attempts' issue?
Can you describe everything that's wrong again, clearly? :)
I don't know what should've been there, but you can remove lines 389, 391 (Containing just One). No idea if it's 100% safe, or there's a better solution, but...
Better to first try re-extracting your ACPI files, especially if there was a BIOS update/change/hardware change.
If you have an...
Why do you have a Fake ALS when you also have a real one?
I think NvmExpressDxe-64.efi can be safely removed.
It's fine to put kexts within Clover/Drivers/UEFI when using latest release. Make sure everything is really there, and that Drivers64UEFI is removed.
You should have necessary kexts in...
Yeah, IOReg wasn't attached to the original archive because you didn't give Terminal accessibility access.
Your trackpad isn't operating in I2C mode, you should use 'Advanced'.
Once you set to Advanced, open Windows Device Manager and check if it's saying trackpad is connected via I2C (Do the...