Glad to help.
Just remember that when using the port limit patch you will have to change this each time you update Mac OS. It should also be noted that it may also introduce some instability into your system by causing corruption of USB driver state. It should really be thought of as a...
This is a problem that is related to the integrated graphics. Most people have not been able to get this to work, although there are some reports of some people that have.
Here is one report of one person getting this to work, but your best bet if this is really important to you is to use an...
Can you explain exactly were you are having issues. So you can boot all the way into the installer, you are able to format your drives and you hang up in the install MacOS portion? Is this correct? If so there is likely something correputed with the Unibeast drive and I would try and remake on a...
You can do port discovery in different phases. You can boot without flags on first boot to look at your HS ports (like you did above). Then boot with flags -uia_exclude_hs uia_include=HS01,HS02
• Change the HS01,HS02 ports to the ones you have your mouse and keyboard attached
I am unfortunately having a difficult time launching the Install Application from my Unibeast USB during the installation process.
I am getting this error code on the installer when trying to open the app-- Could not launch application: Exception: Couldn't posix_spawn: error 8
This board comes with Intel Wifi/Bt combo chip which for the most part does not work. If you really wanted to use the MOBO m2 slot I would prob get a compatible broadcom chip and follow this guide
other option for sound is to drop in applealc.kext since you already have lilu.kext installed, but i would try the patching option first
you could also remove the other 2 Ethernet kexts, you only need the intel...kext
- you never stated where your install process has gone wrong, so you would need to elaborate further. Maybe place a screenshot of you boot process and where it is hanging
- i would include your CPU when sharing your setup
- i would disconnect all peripherals that are not needed...
I encourage you to read this post as well as some of the other threads in this section. You need to see where the bootloader is hanging, so to do that you need to boot in verbose mode. From there you can figure it out.