Thank you for your suggestions of a possible solution to stability problems.
So far I have tested the effects of removing Broadcom WiFi/BT card. Unfortunately there is no progress in stability. The system continues to crash as before.
Tomorrow I am going to test the effects of the...
Thank you for the prompt response. I really appreciate the effort and your willingness to help.
I always do a clean installation, so I didn’t use Migration Assistant.
This is the WiFi / BT card I use...
I have written before that I have problems with random system crashes. I installed Catalina first and then Mojave. Unfortunately, the replacement of the system has not led to any progress.
I first installed Mojave 10.14.6 (Clover 5111) but the system was very unstable and I had a...
I finally managed to install Mac OS Mojave based on Opencore bootloader (0.7.2). I did the installation on a spare SSD and for now everything is stable and I did not notice anything unusual except small problems related with Bluetooth. The Bluetooth icon is missing in the system...
Thank you for your reply.
Before installing the system I upgraded BIOS to version: F9i (Elias64FR).
In addition, I followed all your BIOS recommendations...
A month ago, I finally switched to the "new" Coffee Lake system. The system is based on the following hardware:
MB: Gigabyte Designare
CPU: I9 9900K
GPU: MSI RX 560 Aero ITX
RAM: Corsair Vengeance LPX (2x32 GB)
M.2 Disk: Samsung 970 pro
SSD: Samsung 850 pro
No, I am not sure about flashing. I read your tutorial and went in order to better prepare for the system upgrade. I was under the impression that it was necessary to flash the firmware.
If there is no need for flashing I will not do it.
I am slowly making final preparations for the transition to the Coffee Lake system (Gigabyte Designare + 9900K + MSI RX 560 Aero ITX + Corsair Vengeance LPX (2x32 GB) 3600MHz + Apple Broadcom BCM943602CDP + Samsung 970 pro + Mojave 10.14.6).
As far as I can see the "test clips" you...
Thank you for the quick response. I will listen to your advice and buy the i9-9900K. When I make the system I will follow your instructions carefully. I hope the transition will be pleasant.
Is there still advice that bios version F9j should be avoided?
Thank you again for your quick...
Did you solve the problem with hardware acceleration (GPU)? Unfortunately, I still have this problem with my RX 560 graphics card.
But I have a bigger problem because I cannot boot from my NVMe (Samsung 970 Pro). I made a clone of my system from an ordinary SSD disc, but Clover still...
I am currently using an old hackintosh based on Ivy Bridge microarchitecture: Ga-Z77X-UD5H- + i7 3770 + MSI 560 Aero itx + Samsung 850 pro.
Finally, I decided to upgrade my system by following your build.
I already bought a Motherboard, Memory, Nvme, I do not plan to change my...
I would ask you for advice on upgrading my old Hackintosh Ivy Bridge system.
I initially planned to make a new system based on the CaseySj configuration:
(I would use: MB...
Although I bought Inateck KTU3FR-5O2I few months ago, I had not installed it yet because I waited an update 10.11.6 in order to make a clean install. Finally, yesterday, I found some time and installed the system, but Inateck card does not work properly: Writes only 16MB/s, read 42 MB/s. The...
First of all, I want to thank you on your great effort in order to share information about compatibility of ATI GPU and OS X.
Which exact model, brand (7950/R9 280) certainly works with El Capitan OOB? Which model you can with safety to recommend?
As I am having problem with USB ports after the installation of 10.11., I decided to follow your example and to order USB 3 card Inteck KTU3FR-5O2l.
Does this card works OOB on 10.11.3? Is there a possibility that it will...