Search results

Loading Google Results...
  1. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    Where's your AppleALC.kext? You said that you cannot have your audio working with AppleALC.kext but it seems like you don't even install it. Your debug files must represent the state where your problem is. Your debug files says you're using VoodooHDA.kext My suggestion: - Remove VoodooHDA.kext...
  2. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    I'm using clover for injecting layout-28 for now. And maybe you need to be more specific about what doesn't work.
  3. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    I just realized that I can get everything working, including external mic, input and output auto-switching, with just a pretty much standard installation method o_O - SSDT for layout 28. Clover patch might work, didn't test it though. But don't use layout ID 3 - SSDT-CX20752 from RehabMan's...
  4. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    okay, I'm stuck, please help - using layout-id 3, i have my speaker, headphones with auto-switching, and internal mic working. I have my external mic on my system preferences but not working. - using layout-id 28, i have my speaker, headphones with auto-switching, and internal mic working...
  5. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    Why is my HDEF layout-ID always showing 07 00 00 00 on ioreg? tried to set layout ID with clover and SSDT to 3 and 28, but ioreg always shows 07 00 00 00. it only changes the HDAU layout-ID If i change the layout ID to 28 with clover and SSDT (btw, do i really need to change both of them? they...
  6. rizkialkaf

    [solved] [BCM94352Z] Bluetooth not working after wake

    Same problem with me, with the same BT hardware Read here page 4-5: I finally solved it by adding a boot flags: bpr_probedelay=100 bpr_initialdelay=300 bpr_postresetdelay=300 and enabling "allow bluetooth devices to wake this computer" on Bluetooth Preferences-Advanced you should probably try it
  7. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    Yes but it's not working. When I plug my headset in (it's a combo jack), it's not auto switching, and if I choose it manually it will not recording and no input level feedback animation. The internal mic works. And the headphone output works with autoswitching as well
  8. rizkialkaf

    AppleHDA problems -- Conexant CX20751/2

    @RehabMan Please help, my audio card is Conexant CX20751/2 I can't make my external mic work. can you please check whats's wrong? Thanks
  9. rizkialkaf

    [README] Common Problems in 10.13 High Sierra

    So i try to compare between trimmed and non trimmed. Trimmed: - Boot time 36-37s - Blackmagic Disk Speed Test: Write 462 Read 495 Non Trimmed: - Boot Time 33-34s - Blackmagic Disk Speed Test: Write 454 Read 499 now i'm confused here. Yes, disabling trim apparently gives me a faster boot time...
  10. rizkialkaf

    [README] Common Problems in 10.13 High Sierra

    My battery status works well, and i'm not sure if i have a slow boot. Do i really need to disable Trim on high sierra? i enable trim with a clover patch I'm using broadwell, and i'm not sure if i have this problem. Do i still need to do a repatch for HDMI ports?
  11. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    I think i finally solve my problem by enabling "allow bluetooth devices to wake this computer" on Bluetooth Preferences-Advanced. After that, I can normally turn ON/OFF BT after sleep. But then i still got another random "Bluetooth not available" issues. So i try to re-add the flags...
  12. rizkialkaf

    The bluetooth of BCM94352z does not work after sleep

    Did you get the solution for this?
  13. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    Oh wow, buying another WiFi card with a random Bluetooth hardware is not a really good solution. And it took about a month for the shipment to my country o_O mine is an m.2 NGFF wifi card, btw So, it is a dead end
  14. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    So, is this a dead end for this? Any suggestion? Did you see anything help from my logs?
  15. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    My BT hardware is 0a5c:216f, it's DW1560 WiFi + BT bought from eBay. Isn't that a hardware that many people use for hackintosh? Here I attached some BT logs. 1. BT logs when it's normal, right after a reboot, with normal functioning button 2. BT logs after the first sleep, it's totally broken...
  16. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    How's your u430, btw? I understand that maybe I need to keep my BT hardware ON while sleep-wake. Then I can have my BT work after sleep, and confirm that I can connect devices properly. So in this state i can assume that firmware are uploaded correctly. But even after that, I cannot switch BT...
  17. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    Is there anything we can do to force BT to load firmware?
  18. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    That's because it was taken right after a reboot. It's fine until a sleep-wake process. And, i just noticed that my bluetooth is actually fine even after sleep if it's turned ON. But since i did a fix for a "turn Bluetooth off", i don't keep my BT ON all the time. The BT will be broken if my...
  19. rizkialkaf

    [solved] Random issues with bluetooth & sounds after sleep

    Hi, @RehabMan I'm also facing almost the same problem, intermittent/random BT problem after sleep-wake. Adding those kernel flags doesn't seem to work. Or maybe I just need to find the minimum-working value? I don't even understand what they (bpr_probedelay, etc) do, so how do I know which...
Top