Contribute
Register

Search results

Loading Google Results...
  1. Zottwalker

    How cani re-enable power management?

    yesbuffaloduets, thanks for your advice. I booted using -f argument and then in terminal I run those commands: sudo touch /System/Library/Extensions && sudo kextcache -u / and sudo touch /Library/Extensions && sudo kextcache -u / but nothing changed Trying to change clover boot option I...
  2. Zottwalker

    How cani re-enable power management?

    Thanks for your answer BreBo, I do this but nothing changed. I tried also to find another copy of this kext in other directories or in the efi partition but with no success. power management is still not working
  3. Zottwalker

    How cani re-enable power management?

    Hi to all. After the installation of mojave using multibeast I checked by mistake "nullcpupowermanagement" option. I need to re enable power management on my build; how can I do that? I checked for nullcpupowermanagement kext on my S/L/E and inside my EFI but I hadn't found it. Thanks as usual...
  4. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    I just used your AML file and all ports works perfectly. The Hub and the SD card reader on my BENQ PD3200U monitor are correctly recognised. Speed of the card reader is not so high but this is a limit of the reader. usually I keep connected a TS451-A QNap NAS via USB 3.0 port (speed is about 110...
  5. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    Just installed the AML file, all ports works perfectly a very high speed.The Hub on my BENQ PD3200U monitor works fine and also the SD card reader bundled with the monitor word fine (speed is not very high but I think that this is an sd card reader limit; using my lexar pro reader the speed is...
  6. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    Thanks Casey, I'm going to adapt the DSL file posted by CmdrX3
  7. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    and... one more thing... :-) I have an USB3 hub inside my monitor connected to SS10. I need to discover all 4 ports located on my hub and than add those ports in to the DSL file or this is not necessary? Thanks, again...
  8. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    Thanks a lot CmdrX3, this is a very big help for me. I have a question regarding 15ports limit: the rear top left port is marked as HS06 when used for USB2 devices and SS09 when connected to an USB3 one. This means that the same connector use two ports it isn't? If for example I plan to use this...
  9. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    I forgot...: tried to set on multibeast to patch ports and I also installed this... https://www.tonymacx86.com/threads/success-asrock-z390-extreme4-i7-9700k-progression.267367/post-1883804 but nothing happened
  10. Zottwalker

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    Dear all, I just finished my new build using this configuration: MB - ASRock Z390 Extreme 4 CPU - I7 9700K RAM 32GB @3200 GPU: Saphire RX580 Mojave 10.14.2 fresh install All I need works fine (ETH, gpu etc.) but my USB 3.x ports don't recognise connected devices if the connected device is a USB...
  11. Zottwalker

    [ROUGH GUIDE] Fix for Finder Preview not working on Mojave 10.14.1+

    Thank You!!! Worked perfectly for me too!!!
  12. Zottwalker

    GTX 970, DP and 4K problem

    Hi people.I just buyed a 4K thinkvision x1 display connected to my graphic card via DisplayPort. Video card bios is updated, cable is high end but I have a problem. selecting resolution in the displays preference section os system preference I can get as native resolution only 1920x1080 and...
  13. Zottwalker

    [success] Mojave on z87X UD-5H and I74770K

    just made a fresh install of Mojave on my machine (Z87X UD5-h, 16GB RAM, I7 4770K, Nvidia GTX 970) I was using Sierra because I had a lot of problems trying to install high Sierra; I had never be able to boot the installation program even with a lot of different configuration and bios settings...
  14. Zottwalker

    MacMini stop booting after pen drive use

    addendum... I trie to reset Nvram using cmd + opt +P +R but it doesn't works
  15. Zottwalker

    MacMini stop booting after pen drive use

    Hi to all. I needed to do a clean install of OS X Sierra on two Mac mini late 2014. I used the same couple of USB drive that I created to install Sierra on my Hackintosh but installation process didn't started and after this my Mac mini stopped to boot; every time I turn it on I can only get a...
  16. Zottwalker

    Installation end with a prohibition signal on z87X HD5H

    Here again after holidays :-) I completely deleted all partition on my pendrive using a windows pc. Created again the bootable drive but... Now the pen drive doesn't but anymore. Bootstrap ends with this message: com.apple.windowsserver.590 (warning) : service exited with abnormal code: 1 and...
  17. Zottwalker

    Installation end with a prohibition signal on z87X HD5H

    Sorry, it is my poor English :-) The process of creation of the pen drive using unibeast it takes about 15 min as you told; it is the installing process that jumps directly from 8 min to 3 min; I know that the estimated time it is only a nice joke but usually installing all other OS from lion...
  18. Zottwalker

    Installation end with a prohibition signal on z87X HD5H

    I tried also to starting verbose mode. at the beginning the text part scroll following the bootstrap process. then the apple logo screen appear, then the graphic interface start and appear the error message (follow the screen capture).I have the feeling that something is going wrong in the...
Top