Search results

Loading Google Results...
  1. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    OK. Finally got touch working under OpenCore 7.3. Trackpad gestures not working with more than two fingers - but that is not that important to me as now my pen works :-). I read some posts on the I2C glitter feed and got a clue about the order of kext loading and the importance of ssdt-xosi...
  2. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Took me a couple of weeks to solve my 11.3 issues. There was a lot of hassles, especially with ACPI (Fn F9 - ACPI boot menu) losing the boot menu for Opencore and Fedora, repeatedly. The best way to fix the loss of the menu in ACPIThis has been solved by a combination of opencore 0.6.8 and an...
  3. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Any of you X360 1030 G2 hacks installed 11.3 update without issues? Calan
  4. Calan

    Success - HP Spectre X360

    Just an update. Things had been stable on this hack up until I upgraded to 11.3. (running opencore 0.6.5) Now the USB 3 ports work but do not detect or power USB2 devices... and my brightness control is fubar'd - so have to use external HDMI monitor... It appears that there are problems on...
  5. Calan

    [Success] HP Pavilion x360 15-cr0037wm (OC 0.6.4)

    Hey ryulove3, does your touchscreen work with this hack? regards Calan
  6. Calan

    Success - HP Spectre X360

    Also, had to update to opencore 0.6.3 to finish installation of Big Sur 11.0.1. Regards Calan
  7. Calan

    Success - HP Spectre X360

    I am running opencore booting from internal SSD. Please see this other thread for further information. https://www.tonymacx86.com/threads/hp-elitebook-1030-g2-postinstallation-help.282005/post-2187990 Regards Calan
  8. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Hey MrFreaks, if you used my EFI within the ACPI folder there is a SSDT that enables the battery. I also have a battery sensor kext within the kext folder. Calan
  9. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Beta 10 borked my machine. Had to reinstall beta 9 yesterday....
  10. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Hey, restart the laptop and as it restarts hold the Fn and F9 keys until you see: starting the Boot menu. This give a list of volumes that can boot using ACPI - the USB disk volume and/or the internal disk that you installed to should be listed. Select that and boot. Then the opencore menu...
  11. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    New update. Have installed Big Sur beta 9 using opencore 6.2. Everything works with the exception of the touchscreen. I do not have to press Fn F9 to select an UEFI boot like previously using clover. If HDMI screen attached when booting the screen is not recognised, plugging and unplugging...
  12. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Still on Mojave. Just successfully installed the intelwifi and bluetooth patches from https://github.com/OpenIntelWireless/. -- Both work!!! No dongles anymore... regards Calan
  13. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Another update! I discovered a better APPL,ig-platform-id string for this machine. The changes are AAPL,ig-platfrom-id 0000C087 device-id C0870000 Previously I have been spoofing the CPU as Skylake chip, to get the HDMI external graphics to work...
  14. Calan

    [Guide] HP Envy X360 13-y00XX (Mojave 10.14.4)

    Using my bose noise cancelling headphones plugged into the headphone port of the HP X360 Elitebook G2 1030 - the microphone works fine. regards Calan
  15. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Just an update to booting with brightness enabled off of the external ssd. By accident I have discovered that I restart the machine with Fn F9 pressed to launch the boot menu and then selected the MacOS UEFI entry then the machine will boot and enable the brightness controls, if I boot without...
  16. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    Here you go joeybozo. regards Calan
  17. Calan

    HP EliteBook 1030 G2 PostInstallation Help

    @derder I have the same model HP . 1030 G2 Elitebook but the i7 variant. I can hot plug HDMI only when the graphics frame buffer is spoofing a Skylake GPU. Unfortunately, I lose the touchscreen support when I boot like that. Also, I have problems with the backlight working properly when...
  18. Calan

    [Guide] HP Envy X360 13-y00XX (Mojave 10.14.4)

    Kudos for audio layout information. On my HP X360 Elitebook G2 1030, the layout 21 works best supporting internal speakers and headphones, layout 3 just supports the internal speakers. regards Calan
  19. Calan

    Success - HP Spectre X360

    Just an update. In the post above I spoofed the CPU id to be Skylake using the lilucpu=8 switch in the boot line of the config.plist. This seemed to work for a while and then something changed and I was back to booting from my external HD version of Mojave. After a few weeks of testing and...
  20. Calan

    Success - HP Spectre X360

    Hi Jay, further to above, I have now have nearly everything working on the HP 1030 G2. Mojave was installed to the SSD via Carbon Copy cloning. Sound (Internal speakers and headphones), USB-C to DVI graphics, HDMI to DVI graphics. I access wifi using a USB TP Link 823N adaptor. Brightness via...
Top