I use SSD in main bay and use HDD (SATA) in dvd-driver bay.
I just use CtlnaAHCIPort.kext. (HDD is samsung from 2015)
I disabled "put hdd on sleep on any situation"
I used command line "sudo pmset -c spindown 0"
After doing all above, when it is not in use, it will un-plug...
Thanks for usefull kext and information.
My problem is after installation phase.
I got -lilluforce boot flag refrence from your discussion below on insanelymac.
will try without boot flag and report here.
PS: ECEnabler.kext works fine without boot flag also.
After reviewing ECEnabler guide in it's Github page, i found it should be used with boot flag "-liluforce" in Nvram section, otherwise will not force APCI to render 8 bit.
now battery plug-in indicator will work without any issue.
After install BigSur 11.4 and changing wifi to en0 (ticked under BSD on hackintool) the app store show error: cannot connect to app store!
serial generated by Gembios and is valid but expire.
is there any fix for this issue guys?
Tried all suggested ways but unfortunately didn't work.
with all ways battery indicator will not shown.
just putting DSDT with ACPIbatterymanager.kext will fix it but same issue and while pluged in, there is no charging indicator.
My ACPI (DSDT, SSDT) were not correct.
First of all, just download clover bootloader zip and flash it to USB. Only clover bootloader, you do not need any other installation files.
Boot with that USB and press F4 and wait a second.
All the DSDT and SSDT will generate into the usb. Then you...
Guys, i faced a problem with battery charging indicator in BigSur 11.4 on Hp Pavilion 15-cc102tx.
- Issue: battery indicator is showing power source: battery when it either in plug or on battery and read-out percentage will not update during charging!
1- when it's un-plug draining...
I am a little new to opencore and hakintosh.
I carefully followed opencore installation guide through their website and gather onencore EFI related files from github accordingly to my laptop Cpu.
* All thing was ok execpt ACPI error showed on my screen but process continued and...