Search results

Loading Google Results...
  1. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    @CaseySJ, I have been running Big Sur for some time. It's a handful that won't "start" until I do a "sudo touch /Library/Extensions" then they all finish loading within a few seconds. These are the ones (that I can see) that aren't starting until that: - HighPoint*.kext drivers - All my...
  2. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @CaseySJ, I hope all is well! No sign of that...and I didn't do any enabling/disabling of SIP...and "csrutil status" shows SIP enabled: I've read that updating the KEXT cache has changed in Big Sur. I saw this on a forum but I'm not sure it's correct (it referenced this procedure for...
  3. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Here's the output of the "sudo kextcache -i /" kextcache -i / Executing: /usr/bin/kmutil install --volume-root / --check-rebuild rebuilding local auxiliary collection kmutil done I've attached a photo of my L/E directory.
  4. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @Feartech, Thank you for the reply. So every time I install an app that installs a "kext" I should move it manually to /EFI/OC/Kexts? Also, if I do that they each need entries in config.plist and need to be "enabled", correct?
  5. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hello All, Since my updates to OC 0.7.0 and 0.7.1 my system isn't loading L/E upon a reboot unless I do a "sudo touch /Library/Extensions" once booted and logged in. And for whatever reason, I still have to do that again the next time I reboot in order to load the extensions in L/E. Before I...
  6. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @OOBIDUB, I pass through all of the devices to Windows 10 running in VMware Fusion on OSX. I don’t use any of them natively. Lam
  7. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Well that's embarrassing :rolleyes: Thank you as always @CaseySJ! Lam
  8. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @zakinster, Thank you for pointing all of us to the Corsair Commander Pro "fix" for Big Sur! I may be doing something wrong, but I put "CommanderProFix.kext" in EFI/OC/Kexts and updated the NVRAM boot parameters with "-revbeta". It isn't working as Big Sur still believes a UPS is connected...
  9. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @CaseySJ, I forgot to mention that I have an "add" to your working list of accessories on your main guide: - MOTU Fireface UFX+ (https://www.rme-usa.com/fireface-ufx.html) This is a TB2 device and I use the Apple TB3 to TB2 adapter...
  10. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi All, Ok... After upgrading to 10.15.5 I ran the GB5 Metal and OpenCL tests with and without my newly modified "RadeonBoost-v1-6+Vega.kext" (attached and created using @scottkendall's suggestion) and compared them to my 10.15.4 install. For reference, here are my 10.15.4 results with RBoost...
  11. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    @scottkendall, Thank you. I should have thought of that! I'll report back how things go after my upgrade to 10.15.5 and the new RBoost.v1.6+VEGA. Lam
  12. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @scottkendall, Any idea how to add that support back in? Thanks! Lam
  13. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hello Everyone! Quick question on upgrading to 10.15.5. I've seen a number of discussions on RadeonBoost. Since I'm running "RadeonBoost-v1-4+Vega.kext" right now, can I still use it after the upgrade or does anyone know if v1.6...
  14. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Thank you @CaseySJ. Couldn't have done it without this thread and all your work!
  15. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hello Everyone, After some more searching I finally found a simple and quick way to solve my "Wake from USB" challenges... https://github.com/1Revenger1/oc-laptop-guide/blob/master/battery-power-management/correcting-sleep-problems.md and here...
  16. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @CaseySJ, Did that a bit ago and it still is waking right up. Look like my three RME Audio Devices (one is connected via TB and the other two via USB) are very "chatty"...when I shut all three of those off sleep worked. It's really not a great option for me to shut all three of those down...
  17. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @CaseySJ, I removed the HS11/HS12 and rebooted and it still wakes immediately from sleep. I've pulled another 3 or 4 USB connections and it is still doing the same. Here's the log: 2020-05-04 21:05:01.299382-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason...
  18. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I know :-( It’s just because of all my Corsair items connected internally to HS11/HS12. It would be great to have the option to not have to worry about any USB device waking the system and only having the power button do the waking :) Lam
  19. lambusser

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @CaseySJ There's one final thing I've LOVE to get working on my system and that's sleep by make some SSDT changes so only the power button can wake the system. I found this posting: https://www.insanelymac.com/forum/topic/311678-how-to-disable-wake-from-usb/?do=findComment&comment=2237748...
Top