Search results

Loading Google Results...
  1. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    USB update to Monterey completed without incident! Once that was done I also updated OC to 7.5. (my usb Bluetooth module was not working after the MACOS update, so I figured I should give the OC change a try). So far no issues
  2. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Ha! My first instinct was to create a USB install..But when I went to boot it up, I stopped as I figured a bare metal NUC booting the Monterey install would shut down rather quick...but I just tried plugging it in, letting opencore present my boot options and when I selected the USB stick, I...
  3. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    No joy with Monterey update. Running a nuc8i5beh. I recently updated from OC 68 to 73 ran for a few days without issue. Tried the upgrade and it failed. I then updated to OC 74 (no Bluetooth), and tried the update again. The update runs and then reboots. It goes through it's paces, but...
  4. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Just a quick note...for those that have not pulled out the motherboard, the fan on the bottom is right up against the heatsink fins....I had an amazing build up of dust between the two...hard to believe much air was getting across the fins. Saw some other recommendations that cleaning this out...
  5. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Updated my nuci15beh to the OC63 folder that was shared back in November and installted Big Sur and it's been working great. I even did the Big Sur 11.2 update today with no issues. One thing I have noticed is my fan seems to be working a harder since the change to big sur....I have become a...
  6. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Thanks! I had already downloaded your file, stuck it on the efi partition of a usb stick and it rebooted into macos, so I was starting to wonder if all I had to d was transfer over my personal stuff like serial :)
  7. Richtw

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    I think it's about time for me to move from clover to opencore 1) big sur is coming. 2) it looks like appleALC kext has issues with my install if I update beyond 1.49. 3) Clover 5123 and above seem to have an opencore kludge/componenent and I would need to figure that out. What's my first...
  8. Richtw

    An iDiot's Guide To Lilu and its Plug-ins

    I am running a nuc8i5beh, with catalina 10.15.6. I use kext updater to periodically check and copy any updates to the efi partition on my drive. That has not been giving me troubles till recently. When I copied over appleALC 1.50 and rebooted I no longer had sound and it looks like the internal...
  9. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    running 10.15.7 on nuc8i5beh, efi based on leisureone's files, but updated with recently current kexts. Bios is 071 (BECFL357.861.0071.2019). Only issues I have seen is. 1) updating appleALC beyond version 1.49 causes loss of sound (I think I have to update config.plist), and updating clover...
  10. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    just an fyi - seems everything after 5122 has changes in anticipation of Big Sur....so unless you read up and are prepared to make the changes in config (which I did not) updating clover seems to be a bad idea!
  11. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    thanks for the guidance...got the old version of clover booting on USB with copy of files from efi...was able to boot in to macos. disconnected USB, installed clover 5122 to the efi partition, rolled back Kexts and all is now well. Got to spend some time thinking about figuring out...
  12. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    HELP. I usually run kext updated, apply the updates for clover or kexts and reboot without any problems but... today I applied the kext updates and moved from clover 5122 to 5122....the first reboot took me to clover where it would try to boot the macos volume, but end up back at the clover...
  13. Richtw

    << Solved >> Catalina easy update and sound fix

    I am running a nuc8i5beh, with catalina 10.15.6. I use kext updater to periodically check and copy any updates to the efi partition on my drive. That has not been giving me troubles till recently. When I copied over appleALC 1.50 and rebooted I no longer had sound and it looks like the...
  14. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    That was my first thought - but the guide for the issues list said to only use that if you had solutions or code updates....for everything else use the "support forum"...did not see one. There is an AppleALC forum on insanely Mac, but I was not sure that was the best place, so just hoping for a...
  15. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    updated AppleALC.kext to version 1.50 (released yesterday) and upon reboot no sound and no audio controls. Backed it out and put in 1.49. Everything working fine. Wanted to check if there is someplace where I might want to post my experience to help developers?
  16. Richtw

    [Success] WORKING Intel Wifi Drivers for 7265AC on Catalina

    I have a 9650 and the version from post 136 worked for me....I did have issues getting the commands to run. I ended up typing them in rather than cut and pasting.
  17. Richtw

    System halted after updating 5109

    updated clover to 5117. All the themes that were failing on earlier versions, preventing successful boot now work for me!
  18. Richtw

    [Success] WORKING Intel Wifi Drivers for 7265AC on Catalina

    I grabbed the latest version from earlier in the thread (post 136, page 14...AppleIntelWifi), updated with my wifi info, and loaded from the desktop. Using NUC 8 with 9650. I had connectivity right away...this looks promising....I am also running the IntelBluetoothFirmware kext, so just for...
  19. Richtw

    [Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

    Until now I have never had any luck getting the SD card reader to work..but this week I added the newest version of the Sinetek-rtsx kext to my folder and once I rebooted it worked perfectly! wanted to share in case any one else still had this problem
Top