UPD: Everything works perfectly on latest OpenCore, used quirk values from OC Vanilla Guide. Originally enabled more than probably needed from OpenCore docs in AptioMemoryFix migration section.
Has anyone using OpenCore on this board upgraded to 0.5.4 or 0.5.5? I'm experimenting...
I wonder why it made it work. It changes board-id to board-ix to fix black screen (AppleGraphicsDevicePolicy check for Apple supported hardware). Maybe by default vit9696,pikera value is used when there is an external GPU and 5K works only when there is only Piker's patch used.
I'm on Catalina with an older LG 5K and GC-Alpine Ridge (2 DP and Thunderbolt header) - no issues at all, webcam/speaker/microphone/usb working. Full 5k without WhateverGreen and using a board-id patch. iMac 18,3
But have to enable WhateverGreen for macOS updates or recovery mode
Thanks a lot! That makes a lot of sense, I think I'll completely switch to OC once I finish the documentation.
I actually reverted back to Prime because it has a Thunderbolt header, otherwise my LG 5K won't work properly.
Your OC EFI will save me a lot of time!
Sorry, can't say for sure. I never even got to fixing sleep on Designare, as it's a full development daily driver which stays on at work hours. But it actually makes sense to get it working to compensate for boot times!
Hi @NorthAmTransAm, thanks a lot for the guide!
Was wondering if you switched completely to OpenCore and your experience, I'm rebuilding the system with identical specs as you and might as well switch to OpenCore and use your config.
Also, only because of this guide I found out about an iMac...
- ASUS PRIME Z370-A
- Yes, more on this below
- Yes, yes, yes and yes!
- I had initially set Orinoco framebuffer with no Inject Intel (with headless iGPU setup) as several guides were suggesting it, but after deleting it the default auto-selected framebuffer gets me much more fluid UI...
Hi everyone, a quick update to anyone following my quest for full 5K resolution on LG Ultrafine 5K.
I went ahead and rebuilt the system on a mobo with a Thunderbolt header for GC-Alpine Ridge. Initially I still had very weird 4k to 5k scaling until I removed WhateverGreen. I already notice an...
That's quite upsetting, at this point I think I'll rebuild the system on another mobo with a Thunderbolt header (no header on Designare Z390). It now seems that Thunderbolt header is required for macOS to recognise the display and understand how to handle it.
I finally got a GC-Alpine Ridge rev 2 card to get 5K working. It was around 40% cheaper than the newer Titan Ridge based cards on Amazon in case anyone is thinking of buying it. It can be a great deal if only video is required (no microphone, speakers, camera is working of course).
Here is my...
Just to be sure, does it actually mean we can add a Thunderbolt Alpine Ridge card like GC-Alpine Ridge to Designare Z390 without using the Thunderbolt header to connect the Ultrafine 5K using two DisplayPort inputs? Of course only for image, no brightness control, usb and so on
I actually saw...
That's for headless iGPU, I am now pretty sure there's no way to get 5K on old LG 5K connecting dGPU -> Designare -> Monitor.
I'll switch back to fully enabling iGPU - maybe you'll find something useful!
My SwitchResX output for the old LG 5K:
4096x2304, scale to 5120x2880 with pixel clock 593,82 MHz
Attaching the AGDCDiagnose output.
Also, before going with headless iGPU I saw two monitors connected which I thought was a bug, one from iGPU and one from dGPU. Could this mean that it was...
That is a great summary, thank you very much!
I wonder if someone could actually prove this once and for all, this was bothering me for a while :) I've got some dead pixels on my unit, hopefully the shop will replace it with the new version.
Read many messages that LG 5K runs only at 4K, is there a way to know for sure?
I'm using Thunderbolt on Designare and see:
Resolution: 5120x2880 (5K/UHD+ - Ultra High Definition Plus)
UI Looks like: 2560 x 1440
Update: I'm using the old 5K, not the new...
Got LG Ultrafine 5K via RX580->Designare->Monitor. Camera, USB on the back, audio - everything works perfectly. Been seeing two displays instead of one, but fixed it with making iGPU headless. BIOS also shows up on screen. hotplugging the display after boot doesn't work as far as I...
I just bought a Sapphire Pulse RX 580, also probably with different memory. Switching from WhateverGreen to the suggestions below made a huge difference, but I still experience quicklook bug with jpg, might be helpful. As I understand even when using WhateverGreen a different...