I have audio but dont have a mic input. Inn clover configurator, I have these patches. Im thinking since I dont have an alc 892 kext installed, im using this patch in order to get audio, is this correct? Do I need the other patches as well? I do have RealtekRTL8111.kext installed, but I dont...
Its a z97-a 3.1 mobo. Is there any way to get the 3.1 ports working? Or is there a way to use them only as 3.0 ports in a custom SSDT? Or is my best bet just to not use those ports and create a custom SSDT?
What is the difference between 8086:9xxx and 8086:9cb1 in the SSDT? Which would i list...
I plugged 3.0 and 2.0 into each available port. 7 & 8 are front USB ports and 1 & 2 are USB 3.1 ports. When writing the SSDT, would I use " AppleUSB30XHCIPort@XXXXXXX " for port name?
And am I ok to use the SSDT template he provides in the write up or would it be different for the 9 series?
Ok will do.
I tried deleting fakePCIID_XHCIMux.kext to see if i needed it, but when I deleted it, I rebooted and could not use bluetooth or wired keyborard/mouse. I had to boot USB and reinstall it to work again... Am I doing something wrong cause it didnt seem to do that before I installed...
That HDD is connected to the front usb's which goes to the mobo to the USB port. Is that why it shows usb to sata? Speed is the same for the front and rear usbs.
What will customizing my SSDT do? Do you have any links on how I go about doing that?
i remove patch limit and include -uia_exclude_hs to the custom boot arguments, but im still getting the same disk speed and having issues with large file usb disk transfers, -error 36 "could not complete operation because some data could not be read or written"
If thats short term then what is the long term?
Your saying im already routing all HSxx ports on XHC to EHCI controllers, so there is no need to use the port limit patch, and instead use -uia_exclude_hs ? How do I use -uia_exclude_hs?
I started running through this and here is where im at. I couldnt read usb drives and would randomly eject, until I used this:
But now I have slow speeds (100 Mb/s) and transferring seems to be a...
I started running through that. Im new to this so I apologize in advance. I read through it a couple of times, but dont completely understand some of it.
I have a 9 series board
I did the EHCx->EH0x rename in the clover configurator
I have FakePCIID_XHCIMux.kext and FakePCIID.kext installed...
Do I leave those values in for BootConfig 0x28 and CsrActiveConfig 0x67, disabling SIP?
Or do I enable SIP and move the kexts to EFI and injectkexts in config?
It looks like im getting slow USB speeds. My usb 3.0 drive is writing 105 Mb/s and transfers data really slow.