- Joined
- Jan 17, 2014
- Messages
- 19
- Motherboard
- Dell T7910
- CPU
- 2x E5-2696v4
- Graphics
- RX 580
- Mobile Phone
Simple follow this guide :
The only thing you need taking care of is: DISABLE 4GB IO MAPPING FOR T7910.
[SUCCESS] Dell Precision Tower 7910 * E5-2699V4 * RX5700XT * Opencore 0.8
- Thread starter nhonguyen.80
- Start date
The only thing you need taking care of is: DISABLE 4GB IO MAPPING FOR T7910.
- Joined
- Oct 4, 2018
- Messages
- 1,485
- Motherboard
- Gigabyte C246-WU4
- CPU
- E-2278G
- Graphics
- WX7100
- Mac
If you have boot-arg
npci=0x2000 (typical solution to halts after "PCI Configuration begins", and typically required on Xeon-class systems), it activates "Above 4G decoding" anyway.
- Joined
- Dec 1, 2012
- Messages
- 3
- Motherboard
- HP > Need full model name > See Forum Rules!
- CPU
- i7-3770
- Graphics
- HD 7670
thanks u. your efi is helpful.
and I did install Ventura with 2 cpu and rx6600 successfully. currently my hackintosh's audio is not working. I try to follow the guide: https://dortania.github.io/OpenCore-Post-Install/universal/audio.html#finding-your-layout-id, but it is not successful:
the audio chip set is ACL3220, so I followed ACL 280's layout ids(layout 3, 4, 11, 13, 15, 16, 17, 18, 21) to try with alcid=xx. there is no lucky. Do you mind give any suggestion?
@grandleaf, thank u too. confirmed "DISABLE 4GB IO MAPPING" is important.
- Joined
- Jan 17, 2014
- Messages
- 19
- Motherboard
- Dell T7910
- CPU
- 2x E5-2696v4
- Graphics
- RX 580
- Mobile Phone
I use a USB spdif connected to my receiver.
If you also want to monitor the CPU utilization or temperature, please use FakeSMC3 with plugin. The VirtualSMC and SMCDellSensor is broken for T7910. You can see the CPU's utilisation but no temperature. To Make his worse, he SMCDellSensors also makes your audio stutter. No matter the audio is through the external USB interface or HDMI or DP. Switch to FakeSMC with plugins fixed the problem for me (just figured it out today!)
- Joined
- Apr 8, 2015
- Messages
- 9
- Motherboard
- Dell Precision T7910
- CPU
- 2x E5-2630 v4
- Graphics
- R9 290X
- Mac
- Mobile Phone
Thank you for this. Sorry i didn't reply before now, i gave up and kept limping my macpro 5,1 along. but now its at the point where i have to replace it, so i'm back at it again. Thank you for the updates. have you tried upgrading to sonoma? i'm gathering a parts list for the T7910, and currently i have x2 e5-2630 v3 in it right now, and plan to buy 64gb of ram for now. Also would a rx 580 be a good choice for this machine on macos? i want to run video game emulators. thanks again.This is an old EFI version that is not supported in Monterey/Ventura. You should try to use a new EFI as the link below which avoids kernel panic "non-monotonic time" during Monterey/Ventura booting.
GitHub - BillDH2k/Hackintosh-DELL-T5810-OpenCore: DELL T5810 OpenCore (Monterey/Ventura/Sonoma Support)
DELL T5810 OpenCore (Monterey/Ventura/Sonoma Support) - BillDH2k/Hackintosh-DELL-T5810-OpenCoregithub.com
- Joined
- Jul 5, 2020
- Messages
- 34
- Motherboard
- Dell Precision T7910
- CPU
- 2x E5-2699v4
- Graphics
- RX 6950 XT
- Mac
- Mobile Phone
@twanhines : Yes, I upgraded to Sonoma, but I encountered some issues with the wifi. As a result, I returned to Ventura, which is more stable connection on my system.
- Joined
- Apr 8, 2015
- Messages
- 9
- Motherboard
- Dell Precision T7910
- CPU
- 2x E5-2630 v4
- Graphics
- R9 290X
- Mac
- Mobile Phone
i bought a broadcom wifi/bluetooth mini pcie adapter that's suppose to work native in ventura and sonoma, which adapter did you use? also would i just copy that efi folder to a usb drive already outfitted with a macos installer? or would i need to create the installer with opencore then copy the efi folder over that i downloaded with all of the opencore settings for the t5810 i got from github?
- Joined
- Apr 8, 2015
- Messages
- 9
- Motherboard
- Dell Precision T7910
- CPU
- 2x E5-2630 v4
- Graphics
- R9 290X
- Mac
- Mobile Phone
Would you be able to share your efi folder? I tried the one linked and I get panic on cpu 16 and prt errors in verbose mode. the odd thing is that in the panic text file on the usb drive, it appears that the installer is referencing high sierra for some reason, even though the installer is for ventura.