- Joined
- Aug 14, 2011
- Messages
- 584
- Motherboard
- Hunsn BM21 Desktop Computer
- CPU
- i9-10900K/H370
- Graphics
- UHD 630
- Mac
- Classic Mac
- Mobile Phone
I have set (the machine is set to boot) not using the Acidanthera OC GUI rather Flavours-Collor OC Gui. Both GUI's have the same boot stall/reboot problem. There is a Separate NVME Drive with Windows 11 pro which obviously has a EFI but I am choosing the Ventura disc each time for testing. I did not remove the Acidanthera Golden Gate Image files in Resources as the pointer in the ConfigPlist is pointing to the Flavours folder/files.Are you booting Linux on this system? If not, then you should remove the OpenLinuxBoot.efi from the /EFI/OC/Drivers folder in your setup.
Your config and OC folder are set to boot to the OC GUI, not the OC Picker List. Are you sure you are using the correct EFI when booting? You don't have another EFI on another drive, which may be used?
I have changed the EFI attached below, so it boots to the Acidanthera OC GUI, so you can tell when you are using the correct EFI. Just add your Serial etc, and see how this revised EFI boots.
Here is the original screen-print of the configplist I just sent you with pointer:
Is this incorrect? Based on the Guide instructions below:
Misc -> Boot -> PickerVariant: Flavours-Collor
Now in our config.plist, we have 4 things we need to fix:
- Misc -> Boot -> PickerMode: External
- Misc -> Boot -> PickerAttributes: 17
- This enables mouse/trackpad support as well as .VolumeIcon.icns reading from the drive, allows for macOS installer icons to appear in the picker
- Other settings for PickerAttributes can be found in the Configuration.pdf
- This enables mouse/trackpad support as well as .VolumeIcon.icns reading from the drive, allows for macOS installer icons to appear in the picker
- Misc -> Boot -> PickerVariant: Acidanthera\GoldenGate
- Applicable variables:
- Auto — Automatically select one set of icons based on DefaultBackground colour.
- Acidanthera\Syrah — Normal icon set.
- Acidanthera\GoldenGate — Nouveau icon set.
- Acidanthera\Chardonnay — Vintage icon set.
- Applicable variables:
- UEFI -> Drivers and add OpenCanopy.efi
I had plans to give the owner Triple boot at a later date ie Linux. So I added the OpenLinuxBoot.efi for this purpose and it was not present (in the Big Sur EFI) when the machine was Big Sur with 0.7.5 with the same boot stall/reboot issue.
With the switched Type C out of the USBPort kext the ports work properly showing 10GB/sec when I attach my removeable m.2 NVME test drive formatted to Exfat to the EFI chenges to send to you and showing the slower 3.1 gen 1 speed when I plugin my combo 2.0/3.1 test hub.