Contribute
Register

Asus Z690 ProArt Creator WiFi (Thunderbolt 4) + i7-12700K + AMD RX 6800 XT

motionworks said:
Is it possible to share modified firmware for Gigabyte Titan Ridge 2.0 that you used. Maybe I used a wrong one?
Click to expand...
The screenshot of System Information —> Thunderbolt shows NVM50 was installed. That is a good version, but we have a newer NVM67 that can be attempted. No guarantees, but worth a try. It’s the very last file at the bottom of this post:
www.tonymacx86.com

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Yes, have run Kext Utility didn't fix Didn't get to the bootable backup section yet. Yes, can boot into recovery. Did you also update Clover when you updated Lilu and WhateverGreen? Do you still have the USB install disk? (This was used to install macOS.)
www.tonymacx86.com www.tonymacx86.com
 
CaseySJ said:
The screenshot of System Information —> Thunderbolt shows NVM50 was installed. That is a good version, but we have a newer NVM67 that can be attempted. No guarantees, but worth a try. It’s the very last file at the bottom of this post:
www.tonymacx86.com

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Yes, have run Kext Utility didn't fix Didn't get to the bootable backup section yet. Yes, can boot into recovery. Did you also update Clover when you updated Lilu and WhateverGreen? Do you still have the USB install disk? (This was used to install macOS.)
www.tonymacx86.com www.tonymacx86.com
Click to expand...
I have just tried. In Thunderbolt sections it says no drivers loaded.
 

Attachments

  • Screen Shot 2022-08-12 at 15.12.14.png
    Screen Shot 2022-08-12 at 15.12.14.png
    415.5 KB · Views: 24
  • Screen Shot 2022-08-12 at 15.12.29.png
    Screen Shot 2022-08-12 at 15.12.29.png
    577.1 KB · Views: 27
  • Screen Shot 2022-08-12 at 15.13.11.png
    Screen Shot 2022-08-12 at 15.13.11.png
    517.5 KB · Views: 20
  • Motionworks’s Mac Pro.ioreg
    5.5 MB · Views: 25
CaseySJ said:
The screenshot of System Information —> Thunderbolt shows NVM50 was installed. That is a good version, but we have a newer NVM67 that can be attempted. No guarantees, but worth a try. It’s the very last file at the bottom of this post:
www.tonymacx86.com

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Yes, have run Kext Utility didn't fix Didn't get to the bootable backup section yet. Yes, can boot into recovery. Did you also update Clover when you updated Lilu and WhateverGreen? Do you still have the USB install disk? (This was used to install macOS.)
www.tonymacx86.com www.tonymacx86.com
Click to expand...
Terribly sorry. I have used wrong command to update chip for this one. I fixed it now.
Something different is happened. One of my 5700XT was visible in Graphics/Display section. I restarted and now gone. A few times i saw external gpu icon on the top corner without gpu. One time freezed. I dont know :)
 

Attachments

  • Motionworks’s Mac Pro.ioreg
    5.6 MB · Views: 43
  • Screen Shot 2022-08-12 at 15.53.30.png
    Screen Shot 2022-08-12 at 15.53.30.png
    760.9 KB · Views: 23
  • Screen Shot 2022-08-12 at 15.53.13.png
    Screen Shot 2022-08-12 at 15.53.13.png
    494.3 KB · Views: 20
  • Screen Shot 2022-08-12 at 15.53.07.png
    Screen Shot 2022-08-12 at 15.53.07.png
    665 KB · Views: 19
If i plug the Thunderbolt cable after login, I can see one of 5700XT. But Geekbench and Redshift is not recognizing.
 

Attachments

  • Screen Shot 2022-08-12 at 16.09.05.png
    Screen Shot 2022-08-12 at 16.09.05.png
    435.7 KB · Views: 21
  • Screen Shot 2022-08-12 at 16.09.16.png
    Screen Shot 2022-08-12 at 16.09.16.png
    579.9 KB · Views: 24
  • Screen Shot 2022-08-12 at 16.09.31.png
    Screen Shot 2022-08-12 at 16.09.31.png
    151.1 KB · Views: 22
Hey Casey. Thank you so much for this guide and your effort with helping everyone on here. I am expecting my components for this build. upgrading from z390. I was wondering what BIOS version you are running at the moment for this Motherboard. I see your initial screenshots are Version 0811. I wanted to know if it was safe to upgrade to the latest Bios version available Version 1601.
 
motionworks said:
If i plug the Thunderbolt cable after login, I can see one of 5700XT. But Geekbench and Redshift is not recognizing.
Click to expand...
Well that counts as progress I suppose! When the card appears in Graphics/Displays, please run IORegistryExplorer and post the IOReg file. I’d like to see if the AMD graphics driver is actually getting attached.
 
rolotrealanis said:
Hey Casey. Thank you so much for this guide and your effort with helping everyone on here. I am expecting my components for this build. upgrading from z390. I was wondering what BIOS version you are running at the moment for this Motherboard. I see your initial screenshots are Version 0811. I wanted to know if it was safe to upgrade to the latest Bios version available Version 1601.
Click to expand...
Hello @rolotrealanis,

BIOS 1601 is perfectly good.
 
motionworks said:
If i plug the Thunderbolt cable after login, I can see one of 5700XT. But Geekbench and Redshift is not recognizing.
Click to expand...
Are you trying this with the built-in Maple Ridge Thunderbolt still enabled in BIOS? Just curious as I'm contemplating flashing the patched NVM67 to my Titan Ridge card. I haven't tried this since my MB was replaced.
 
gandem said:
Are you trying this with the built-in Maple Ridge Thunderbolt still enabled in BIOS? Just curious as I'm contemplating flashing the patched NVM67 to my Titan Ridge card. I haven't tried this since my MB was replaced.
Click to expand...
This was done with a flashed GC-Titan Ridge.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top