Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
thanks for the reply, and pointing to the guide for open core

- appears to require a much higher technical and advanced knowledge, compared to this clover based guide by rehabman

- which is already super advanced imo.

maybe a new or updated version of this thread if there are people already have the know how specific to - HP ProBook/EliteBook/Zbook using Open Core (2022) / or Clover (2022) UEFI hotpatch
there may be a post or 2 with opencore already setup in this thread
 
new again to hackintosh - the original post by rehabman has some limits in 2022, the last clover version used in the guide, and the newer version of clover in 2022.

for a new fresh install in 2022 of high sierra, mojave or newer mac osx,

use clover? (rehabmans method, but with the current newest version of clover?)

or open core ?

can some one point to an active or updated guide for, clover or open core, or both.

test machines are g1 probook

thanks
-----If you weren't already aware, note that Clover actually replaced those parts of its internals which would otherwise be redundant by switching to relying on an included vendored copy of OpenCore as of Clover v5.1 r5124 all the way back on October 12th, 2020. (This also gave it Big Sur and Monterey support, for those who're fine with installing those macOS versions.)
 
Last edited:
Hi thanks for the guide , running high sierra on probook 4530s. Everything working absolutely perfect. My only concern is the cpu temperature which can go up to 85 degrees. I know this is within the limits of the cpu I'm using
Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz Sandy Bridge - 2nd Generation Intel Core.
Cpu throttling working fine but wondered if there was a way to increase the fan speed, or am I worrying about nothing?
Thanks in advance for any replies
 
Hi thanks for the guide , running high sierra on probook 4530s. Everything working absolutely perfect. My only concern is the cpu temperature which can go up to 85 degrees. I know this is within the limits of the cpu I'm using
Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz Sandy Bridge - 2nd Generation Intel Core.
Cpu throttling working fine but wondered if there was a way to increase the fan speed, or am I worrying about nothing?
Thanks in advance for any replies
please read the faq for proper hardware profile setup:
 
Hi thanks for the guide , running high sierra on probook 4530s. Everything working absolutely perfect. My only concern is the cpu temperature which can go up to 85 degrees. I know this is within the limits of the cpu I'm using
Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz Sandy Bridge - 2nd Generation Intel Core.
Cpu throttling working fine but wondered if there was a way to increase the fan speed, or am I worrying about nothing?
Thanks in advance for any replies

There is a fan mod by Don Grappler, don_grappler or so that has measurements of the actual temps under load. IIRC he posted diagrams. It's the FAN-SMOOTH or FAN-GRAP (or so) fan mod.

 
Last edited:
I'm guessing that the same as the one in the Hp-Probook-Elitebook-macos.pkg
 
I'm guessing that the same as the one in the Hp-Probook-Elitebook-macos.pkg
As per rules, please update your hardware profile to allow others to help you easier

please read the faq for proper hardware profile setup:
 
There is a fan mod by Don Grappler, don_grappler or so that has measurements of the actual temps under load. IIRC he posted diagrams. It's the FAN-SMOOTH or FAN-GRAP (or so) fan mod.


Hi @sharkoon, are you using OpenCore or Clover?

I have a Probook 4540s running an old RehabMan Clover EFI and want to switch to OpenCore, but I did not succeed…

Could you please share your EFI foder?
 
Last edited:
As per rules, please update your hardware profile to allow others to help you easier

please read the faq for proper hardware profile setup:
Done as requested
 
-----If you weren't already aware, note that Clover actually replaced those parts of its internals which would otherwise be redundant by switching to relying on an included vendored copy of OpenCore as of Clover v5.1 r5124 all the way back on October 12th, 2020. (This also gave it Big Sur and Monterey support, for those who're fine with installing those macOS versions.)

thanks, test install using only rehabmans guide and last version of rehabmans clover, but with newest macos 10.14.6 worked.

only audio wasnt working. how to fix?

anyone else have same similar fresh post install issues?

maybe next test 10.15 or 10.16 or 10.17. clover vs opencore?
 
Status
Not open for further replies.
Back
Top