#[EB|LOG:EXITBS:START] Error After Updating to OpenCore 0.7.5

Hello,
I updated from OpenCore 0.6.2 to 0.7.5 on my 2020 Computer Build (MSI Z490-A PRO) and changed my config.plist file accordingly.
Now I'm getting this error, despite having changed very little. Both my old config.plist ("config-old.plist") and new config.plist files are included for reference, along with the output text file.

I have tried doing what was done on some older posts to no avail: playing around with SetupVirtualMap and RebuildAppleMemoryMap, MMIO, etc. here:

Any other suggestions on what I should try?
Thanks!

Same here. Same versions as OP. Changed all kexts, etc like I usually do. Freezes about 10 lines in. I'm suspecting the new HFSplus driver. Maybe not. I get same stop using a big sur usb too with orig hfsplus.

Going from OC0.6.2 to 0.7.5 is quite a jump! Unfortunately such advances often means key changes can easily be missed.

You can have a look at my EFI for Z490 Aorus Xtreme here on High Sierra-Big Sur for any differences.
> https://www.tonymacx86.com/threads/...re-i5-10400-i9-11900k-nvidia-gtx-1060.310287/

With EXITBS:START errors I'd likely start by making sure your picker is set to 1 on External mode, and that your Picker icons are set to Acidanthera/GoldenGate with Default path. Also make sure your SMBIOS matches up with your setup and OS. On Big Sur most systems should be able to run with iMacPro1,1, iMac19,1 or iMac20,1. You can add
-no_compat_check to your boot-args to help smooth bootups. Also make sure your booter security mode is set to either Disabled or Default depending on the configuration.

I have the same problem. Please help !!!

TonyTech said:

Hello,
I updated from OpenCore 0.6.2 to 0.7.5 on my 2020 Computer Build (MSI Z490-A PRO) and changed my config.plist file accordingly.
Now I'm getting this error, despite having changed very little. Both my old config.plist ("config-old.plist") and new config.plist files are included for reference, along with the output text file.

I have tried doing what was done on some older posts to no avail: playing around with SetupVirtualMap and RebuildAppleMemoryMap, MMIO, etc. here:

Kernel Issues | OpenCore Install Guide

Any other suggestions on what I should try?
Thanks!

Click to expand...

Made a bit of progress by just making my EFI from scratch... Still stuck at the beginning of the loading bar though (gets past verbose).

Any luck on fixing this? I am running across the same issue.

hi...having the same problem with Z390-A and 0.7.6.