Contribute
Register

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

Hi @CaseySJ

After reading your suggestion (and Vit9696's, too) about the TRIM and the NVMe's choices, I bought a new WDC Black NVMe SN750 and tried to copy all my boot disk (namely "Mac") Samsung 970 Pro to it.

I used CCC 6.x but, as you can see from the image attached, it didn't exactly reproduce the partitions' structure of the source disk because there is no "Mac - Data" and no "com.apple.os.update (the snapshots partition). What did I make wrong?

Indeed, even if I copied the EFI partition with OC from source to destination, OC didn't find anything bootable.
 
Last edited:
Lupin
GA-Z97X-UD3H-BK |  i7 4790K |  GTX 750 Ti OC
Elektra
GA-Z170X-Ultra Gaming |  i7 6700K |  Radeon Other
Dr. Strange
PRIME Z270-A |  i7 7700K |  Radeon Other
BigMc
Prime Z490-A |  i9 10900K |  Radeon Other
Dear Caseysj, I used the OC 0.7.0 you provided. Every time I sleep and wake up, the Intel i225 network card cannot be used. So I have to plug and unplug it before I can continue to use it. Could you please tell me how to solve it? Looking forward to your reply
 
dandan7675 said:
Dear Caseysj, I used the OC 0.7.0 you provided. Every time I sleep and wake up, the Intel i225 network card cannot be used. So I have to plug and unplug it before I can continue to use it. Could you please tell me how to solve it? Looking forward to your reply
Click to expand...
Hello @dandan7675,

To determine if the problem is related to OC 0.7.0 please try booting again from your previous OC 0.6.9 EFI. Does the problem occur?
 
777Buzz said:
Thanks, I’ll look into the

X570 Phantom Gaming 5-ITX/TB3​


Did you need to flash the AsRock board?
Click to expand...
Because I can't get boost working which Intel CPU do you use with your UAD Apollo Twin? I'd like to get boost working for the Ryzen. Still stuck at 3.8 GHz.
 
Ivy
GA-Z77X-UD3H |  i5 3570K |  GeForce GTX 780
Vermeer: B450-MSI-ProCarbon-AC | R7 5800X | R9290
H370 GAMING PRO CARBON |  Xeon X5650 |  Radeon R9 290
CaseySJ said:
Hello @dandan7675,

To determine if the problem is related to OC 0.7.0 please try booting again from your previous OC 0.6.9 EFI. Does the problem occur?
Click to expand...
Yes, the same is true of version 0.69. I also had the same problem with another Z490-G motherboard
 
Hey guys wondering if you could help me with the USB port mapping of my z490 Vision D. I understand the process of using Hackintool to create the USB map but a little confused about some. Wondering is there a way to set up USB mapping with the downloads available on the first page?
 
colly420 said:
Hey guys wondering if you could help me with the USB port mapping of my z490 Vision D. I understand the process of using Hackintool to create the USB map but a little confused about some. Wondering is there a way to set up USB mapping with the downloads available on the first page?
Click to expand...
USB port mapping has already been done for both the Z490 Vision D and Vision G.
 
CaseySJ said:
USB port mapping has already been done for both the Z490 Vision D and Vision G.
Click to expand...
Thanks for your reply and sorry if this has been covered, where would I find a Z490 Vision D USB map and how do I enable it?
 
colly420 said:
Thanks for your reply and sorry if this has been covered, where would I find a Z490 Vision D USB map and how do I enable it?
Click to expand...
Simply follow the build guide in Post 1 or use Hackintool App (posts 1 and 2 in that thread) to replace your EFI with the 0.7.0 version available through the app.

Another option is to create a USB port map from scratch by following this guide:
www.tonymacx86.com

The New Beginner's Guide to USB Port Configuration

Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...
www.tonymacx86.com www.tonymacx86.com
 
Last edited:
dandan7675 said:
Yes, the same is true of version 0.69. I also had the same problem with another Z490-G motherboard
Click to expand...
I just tested the i225-V 2.5GbE port, and it wakes up normally from sleep and continues to work.
  • Are you sure yours does not wake from sleep?
  • Which version of BIOS is installed in your motherboard?
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top