Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

zipb said:
OK, so my USB ports are a mess in OC. They are carefully mapped and have hi current in Clover.
Is the USBPorts.kext method of mapping no longer supported? I copied this over from my Clover EFI and removed the USBInjectall stuff, but it clearly doesn't work.
What am I missing?
Click to expand...

Hi there.

Don't know what's missing.

You should be able to transfer your USBPorts.kext over to OpenCore and it will work fine.

However, you can't just copy the kext into the EFI/OC/kexts folder as you did with Clover. You have to explicitly declare it in your config.plist:

USB.jpg

:)
 
UtterDisbelief 2020
Z390 M GAMING |  i5 9600K |  Radeon Other
UtterDisbelief CL
Z370M-DS3H |  i3 8350K |  Radeon Other
UtterDisbelief KL
GA-Z270-Gaming K3 |  i3 7320 |  GeForce GTX 1050 OC
Aha. Declare. Arg. I just threw everything in the bin and emptied it.... it wil just show up in the config.plist if i put in the right folder, ready to be marked?
I have to get used to the marking/unmarking way of working.
 
Z390
Z390 DESIGNARE |  i9 Other |  Radeon Other
zipb said:
Aha. Declare. Arg. I just threw everything in the bin and emptied it.... it wil just show up in the config.plist if i put in the right folder, ready to be marked?
I have to get used to the marking/unmarking way of working.
Click to expand...

You have to add the line with USBPorts.kext to your config.plist so that OpenCore will inject it.

:)
 
UtterDisbelief 2020
Z390 M GAMING |  i5 9600K |  Radeon Other
UtterDisbelief CL
Z370M-DS3H |  i3 8350K |  Radeon Other
UtterDisbelief KL
GA-Z270-Gaming K3 |  i3 7320 |  GeForce GTX 1050 OC
Thanks, UtterDisbelief!
It took some futzing(OC newbie)but now it works OK, I see the right ports and I can charge my iPhone with 1600 mA, according to System Info. This may be a lie. Charging is kinda slow.
But I am happy that it works now.
 
Z390
Z390 DESIGNARE |  i9 Other |  Radeon Other
After recently switching from Clover to OpenCore, I discovered I no longer need my custom USBPorts kext.

At first I brought over my custom map, but then when updating from OC 0.6.6 to 0.6.8 I did a test boot without it. I was delighted to find all the ports worked.

CaseySJ explained that this is because his EFI folder contains a custom map for the z390 Designare. Hope it works for you too - nice to have one less thing to worry about.
 
iMac 18,3
Z390 DESIGNARE |  i9 9900K |  RX 580 Pulse 8GB
zipb said:
OK, so my USB ports are a mess in OC. They are carefully mapped and have hi current in Clover.
Is the USBPorts.kext method of mapping no longer supported? I copied this over from my Clover EFI and removed the USBInjectall stuff, but it clearly doesn't work.
What am I missing?
Click to expand...
FYI, this mini-guide is highly recommended for Clover-to-OpenCore switchers:
Screen Shot 2021-04-18 at 4.30.26 PM.png
 
CaseySJ said:
If they are coming from TZ (thermal zone) they can be ignored.
Click to expand...
SSDT-XOSI.aml for TZ errors. Rename all not just DSDT.
 
Has anyone had any issues slow stuttering Bluetooth and WiFi when network activity is high with the Fenvi T919? If so is there a fix?
 
OK, so the icons on my login screen are huge. I have tried to fix this with the OpenCore output arguments, but now the OC boot icons are huge too instead of fixing the Login screen resolution.

Wiped the NVRAM, cleaned the cache, but still wrong.

How can I fix this?
 
Z390
Z390 DESIGNARE |  i9 Other |  Radeon Other
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top