Contribute
Register

Intel NUC 10 Frost Canyon

picchitta said:
Hi, is there a guide to install mac catalina on nuc10i5fnh similar to that one created to install mac on nuc6 and reported below?
www.tonymacx86.com

[Guide] Intel Skylake NUC6 (and Skull Canyon) using Clover UEFI (NUC6i5SYK, NUC6i7KYK, etc)

Overview The purpose of this guide is to provide a step-by-step guide to install Mojave (or High Sierra/Sierra/El Capitan) on the Intel NUC6 series NUC mini computers. My NUC6 is the NUC6i5SYK, although I expect the guide will work on other similar models (any NUC6). This guide also works for...
www.tonymacx86.com www.tonymacx86.com
Click to expand...
I glommed onto Rehabman's thread here after he moved on form the forums to keep support for the NUC7s and 8s going here #894

It has a very rough guide on how to install, you have to figure out how to download OS X, and EFI folders are uploaded for different boot loaders and models.
 
Hi,
I update my EFI.

- add kext to turn off/on Bluetooth
- add USB kext
- voohooHDA kext modify plist
Click to expand...
I used this EFI to install macOS and its stuck in the line " balabala~~~ enabling legacy matching"
 
zavrus said:
Please use at least post 195 right on this page 4 posts above yours - it's bootable EFI
Click to expand...
it's still stuck in " pic ( build (time), flags 0x20c108
 
er1c2 said:
it's still stuck in " pic ( build (time), flags 0x20c108
Click to expand...
er1c2 said:
now it stuck on the [pci configuration begin] .....
Click to expand...

my stupid~~
I followed a nobody's article and did some bios configurations, that put me into those bizarre situations.
Turn out just use the optimal bios settings and disable the "safe boot" and everything goes well.
Now I am in the installing progression, hoping nothing goes wrong.
Thx for all you guys work !!!!
 
Im (single sata ssd) installing the win10 using the Bootcamp, finishing the process in Bootcamp and it required entering password and then it restarted. But I can't find any entry to the windows installing in the Opencore Boot Llist.
I tried so many EFI in this post and the results were the same. Currently using #195's EFI.
Please help~ thx~
 
er1c2 said:
Im (single sata ssd) installing the win10 using the Bootcamp, finishing the process in Bootcamp and it required entering password and then it restarted. But I can't find any entry to the windows installing in the Opencore Boot Llist.
I tried so many EFI in this post and the results were the same. Currently using #195's EFI.
Please help~ thx~
Click to expand...
Dont use bootcamp on a non-mac. A regular efi windows install is what is needed.
 
Well~~ I'm giving up the dual systems now and very happy with the result of #195's EFI~
svandive said:
Attached
Click to expand...
thanks again!!
But it seems still having some issues:
1.HDMI monitor turns off and restarts / put the nuc sleep and wakeup, the sound through HDMI monitor is gone~(but the built-in headphone plug is still fine).
2.My n-years-old antique bluetooth Mighty Mouse is really weird...It can move the cursor but with no response of any clicking.. :crazy: ceLEFosB4hoo.jpg
 
As i am not an expert, I would like to know the procedure to install catalina on nuc10.
I mean the procedure step by step to follow is that one indicated here
www.tonymacx86.com

UniBeast: Install macOS Catalina on Any Supported Intel-based PC

The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Catalina. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com. Table of Contents Step 1: Download macOS Catalina Step 2...
www.tonymacx86.com www.tonymacx86.com
by replacing the efi file with someone attached to this forum?
I tried with unibeast, with uefi boot, but the usb does not appear in the boot of nuc10i5.
Probably there is something that I miss and it is not clear. Can you help me by indicating a place where I can follow all the instructions?
 
picchitta said:
As i am not an expert, I would like to know the procedure to install catalina on nuc10.
I mean the procedure step by step to follow is that one indicated here
www.tonymacx86.com

UniBeast: Install macOS Catalina on Any Supported Intel-based PC

The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Catalina. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com. Table of Contents Step 1: Download macOS Catalina Step 2...
www.tonymacx86.com www.tonymacx86.com
by replacing the efi file with someone attached to this forum?
I tried with unibeast, with uefi boot, but the usb does not appear in the boot of nuc10i5.
Probably there is something that I miss and it is not clear. Can you help me by indicating a place where I can follow all the instructions?
Click to expand...
That’s exactly right, if you are new to this using Unibeast it is the easier way. Make sure you chose the UEFI boot option though. Once it’s done the EFI folder on your usb drive should still be visible. If not you will need to mount it using EFI Agent or OpenCore Configurator or whatever you prefer. Then delete the entire EFI folder created by Zuni East, empty the trash and then copy and paste the NUC10 version from somewhere in this thread.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top