- Joined
- May 20, 2020
- Messages
- 31
- Motherboard
- Asus ROG STRIX Z390-E
- CPU
- i7-9700K
- Graphics
- RX 570
- Mac
- Mobile Phone
Have you checked this page in your bios?
I set up this page like you but still can't activate XMP.
Could this be a problem?
Have you checked this page in your bios?
No, only if your ram wasn't running at its correct speed, which its is. Have you disabled serial ports and the onboard wifi? I have RC6 (render standby enabled). Have another read of modmikes guide there is a reference to it.Could this be a problem?
No, only if your ram wasn't running at its correct speed, which its is. Have you disabled serial ports and the onboard wifi? I have RC6 (render standby enabled). Have another read of modmikes guide there is a reference to it.
That would be my next suggestion. When I built my rig and installed Mojave, I seem to remember hdmi not working. It does now, but I use a DP port.I haven't tried the Display port yet because I'm waiting for the cable. Could that be the problem
Booting with your display connected on another port (DP)
Yes, it is. You don't get KP anymore, which means the OS is loaded but is now displaying on the wrong port.
That's why we're here!
Try this one: it might work on HDMI without acceleration. That would let you install Catalina and then use Hackintool to patch the iGPU ports to have full HDMI support.
Do some research into OpenCore bootloader. It is much better than Clover IMHO, faster boot times. Have a good read through the installation tutorial. Then download the OpenCore folder from modmikes tewb build and adapt it to your set up.I bought the DP cable. Unfortunately it doesn't work ... I don't know what to do anymore
Do some research into OpenCore bootloader. It is much better than Clover IMHO, faster boot times. Have a good read through the installation tutorial. Then download the OpenCore folder from modmikes tewb build and adapt it to your set up.
I've attached my old Clover folder, you can try it. I've adapted it for igpu. Give it a shot...nothing to lose. It has my port map kext in it, if it does work you may want to remove it, add usbinjectall and create your own.
Try reflashing your bios and starting again maybe.I don't know what to do anymore, I think this is a motherboard problem.
Try reflashing your bios and starting again maybe.