Contribute
Register

<< Solved >> [ PCI Configuration end, Bridges 4, devices 12 ] - Catalina Installation

Status
Not open for further replies.
Namok88 said:
You've deleted the wrong VirtualSMC file (.kext instead of .efi) and didn't install the Lilu and Weg versions I mentioned in my previous comment.

Fixed now

Try to boot with that EFI
Click to expand...

Now the verbose freezes with the black screen. No Kernel Panic.
I send you last screenshot before black screen.
 

Attachments

  • IMG_9580.jpg
    IMG_9580.jpg
    345.6 KB · Views: 51
That means WindowServer is now running on another video port of your motherboard.

Make sure CSM is disabled!

Try to connect your display on other video port (HDMI or DP)

And also try to boot on another video port
 
Namok88 said:
That means WindowServer is now running on another video port of your motherboard.

Make sure CSM is disabled!

Try to connect your display on other video port (HDMI or DP)

And also try to boot on another video port
Click to expand...

Now I'm using the HDMI output. I have to buy an HDMI - Display port adapter and try it.

Yes, CSM is disabled.

What do you mean by starting another video port?

In any case, do you think the black screen is a good sign?

Thanks again for all the help, you are really patient.
 
marva said:
What do you mean by starting another video port?
Click to expand...

Booting with your display connected on another port (DP)

marva said:
In any case, do you think the black screen is a good sign?
Click to expand...

Yes, it is. You don't get KP anymore, which means the OS is loaded but is now displaying on the wrong port.

marva said:
Thanks again for all the help, you are really patient.
Click to expand...

That's why we're here! :)

Try this one: it might work on HDMI without acceleration. That would let you install Catalina and then use Hackintool to patch the iGPU ports to have full HDMI support.
 

Attachments

  • config-marva.plist
    7.5 KB · Views: 80
Namok88 said:
Booting with your display connected on another port (DP)
Yes, it is. You don't get KP anymore, which means the OS is loaded but is now displaying on the wrong port.
That's why we're here! :)
Try this one: it might work on HDMI without acceleration. That would let you install Catalina and then use Hackintool to patch the iGPU ports to have full HDMI support.
Click to expand...

Unfortunately If I replace the config.plist file with the one you sent me, verbose hangs on a kernel panic :(.
 
No need to take pictures of bios, insert a fat32 formatted usb stick and take a screenshot f12 if my memory serves me well. I’m sure you have something amiss in your bios settings.
 
Desktop; Catalina 10.15.5 OpenCore 0.5.8
ROG STRIX Z390-E GAMING |  i5 9600K |  Radeon Other
Laptop; Catalina 10.15.5 HP 430 G3 Clover
H55 Board |  i3 6300 |  HD 530
Big-W said:
No need to take pictures of bios, insert a fat32 formatted usb stick and take a screenshot f12 if my memory serves me well. I’m sure you have something amiss in your bios settings.
Click to expand...

Here my BIOS setting.

I can't enable XMP. The other settings are correct
 

Attachments

  • Setting BIOS - marva.zip
    1.3 MB · Views: 45

Attachments

  • Screenshot 2020-06-05 at 14.07.43.png
    Screenshot 2020-06-05 at 14.07.43.png
    919.9 KB · Views: 46
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top