Contribute
Register

[Guide] Booting The USB Installer Using OpenCore

The guide is saying it's not recommended and tested. I managed BT to get working but Wifi nothing.
I wanted to claim to the seller but on the website it's mentioned not compatible to HP and Lenovo books => https://www.aliexpress.com/item/32842224925.html.

I will try the card in my mackintosh desktop if it's working there.

Other questions using the HP guide everything was working fine (battery, brightness, etc.) I tried using the ACPI aml files but nothing is working on OC. Is it possible to use same DSDT files?
 
You shouldn't use a DSDT on OC, only hotpatches done by SSDTs. Also, if you want to load a SSDT, you need to write a entry into the config for it, there is no auto-load like in clover.
 
The guide is saying it's not recommended and tested. I managed BT to get working but Wifi nothing.
I wanted to claim to the seller but on the website it's mentioned not compatible to HP and Lenovo books => https://www.aliexpress.com/item/32842224925.html.

I will try the card in my mackintosh desktop if it's working there.

Other questions using the HP guide everything was working fine (battery, brightness, etc.) I tried using the ACPI aml files but nothing is working on OC. Is it possible to use same DSDT files?
and make sure to do any renames from the clover guide in your config.plist
 
I found the problem with errors while booting. It looks like the Wifi+BT DW1820a card does not recognized correctly. Even in Windows the system crashes when trying to configure the device under network. For me it looks like that HP blocks the Wifi card. When the card is disabled in BIOS booting to MacOS runs perfectly.

Does anybody have any experience with the WLAN + BT Broadcom BCM94350ZAE in HP laptops?


I have a zbook 17 G3 that I used as a hackintosh for some time. No problems swaping the wi-fi card to a recommended one
 
opencore is a different config.plist different setup
 
any news for dell 9360 OpenCore
 
Back
Top