Contribute
Register

[RESOLVED] Realtek ALC236?

Status
Not open for further replies.
I have the same codec on a Lenovo 710s-13IKB (Kaby Lake). Is it worth trying the same approach on my computer? Running 11.6.
 
Open your config file in Clover configurator.
  1. Make sure you have the HDAS to HDEF patch enabled in ACPI section.
  2. Set Audio inject to 1 and check the ResetHDA AFGLowPowerState boxes in Devices section
  3. Under Kernel and Kext Patches, make sure you have all 6 patches copied from my config and are enabled.
  4. Disable patch 4 if you're running Sierra or patch 5 if you're running El Capitan
  5. Install attached AppleHDA with KextWizard or EasyKextPro in your S/L/E, not in Clover/kexts
  6. Reboot
Just followed your instructions on my Lenovo 710s-13IKB and it's working! You are my hero, this saved me between 10 hours to infinity of work. Have a wonderful day!!
 
Under Kernel and Kext Patches, make sure you have all 6 patches copied from my config and are enabled.

Which patches...where? Sorry!
 
Under Kernel and Kext Patches, make sure you have all 6 patches copied from my config and are enabled.

Which patches...where? Sorry!
if u found this
please tell me Too.
 
Under Kernel and Kext Patches, make sure you have all 6 patches copied from my config and are enabled.

Which patches...where? Sorry!
it's in the audio fixes.txt . Copy all of the 6 patches to your config.plist file.
 
Status
Not open for further replies.
Back
Top