Contribute
Register

<< Solved >> Gigabyte Z390 UD Only 7Mb UHD630 Mojave 10.14.2

Status
Not open for further replies.
Thanks for your input! My question is this z390 board works well? Or could I invest money to buy a better motherboard? My work is editing raw video, heavy vfx. and I would like to know if you could tell me what usb2.0 memory you used? And which of the ports on the board did you connect? please!!!! It's my first hackintosh and I can't even make the USB work, it doesn't boot. Thank you!!! :headbang::headbang::headbang::headbang::headbang::headbang:
Click to expand...

I have the same question. I would like to build a system now with a cheaper 9th gen. processor for video editing, and eventually RAW video color correction in Resolve, that I can upgrade with the I9 9900K when it becomes cheaper.
 
SlugNet's Video Editor
GA-Z77X-UD5H |  i7 3770K |  RX 580 Pulse 8GB
CaseySJ's iMac
Z390 DESIGNARE |  i7 9700K |  RX 580 Pulse 8GB
aertonda said:
Could you post your full EFI folder of Z390UD Mojave working properly?
That's such a big help...
Click to expand...
This is mine. It has the same problem as anyone: video driver that doesn't work properly straight from the start with causes mouse freezing (disappears after 30 sec or so). Also it happens from time to time that it doesn't recognize my lan straight away. A reboot solves this, anyone else having this problem or is it just me? Also... Mac OS Catalina is out!! Anyone tried it so far on this setup? I hope to give it a go next week.
 

Attachments

  • EFI.zip
    29.4 MB · Views: 208
grib666 said:
Waow, my friend!!! You saved me!!! After 40 hours on this build, I thought I'll never get it.

Now I have sound, HDMI video with 1536Mb and LAN working. Fabulous, thanks you soooo much.

Only one thing that is not OK : mouse very slow during more than one minute after startup.
If anyone knows why?
Click to expand...

HI @grib666, I have the exact same build as you and I have experienced also the problem with the Intel UHD 630. Can you gave me a simple guide (step by step but not super detailed) of what you have done to solve the problem? (how do you create the usb ,if you use Unibeast , what to do with the EFI folder that @MatanLevis suggested ecc). Thank you in advance :)
 
ferrandinyo said:
Hi everyone,

I'm mounting a hackintosh for a friend with this same motherboard. Your EFI and config.plist helped me a lot.

Just wondering, have anyone solved the mouse lag after boot?

Thanks.
Click to expand...
this can be fixed using iMac19,1.

i have a gigabyte z390 ud board (f9 bios), along with an i5-8400 cpu and uhd 630 and that fixed it for me.
 
aquilaa said:
This is mine. It has the same problem as anyone: video driver that doesn't work properly straight from the start with causes mouse freezing (disappears after 30 sec or so). Also it happens from time to time that it doesn't recognize my lan straight away. A reboot solves this, anyone else having this problem or is it just me? Also... Mac OS Catalina is out!! Anyone tried it so far on this setup? I hope to give it a go next week.
Click to expand...
Hello aquilaa,
Hi I am new to hackingtosh. I want to install mac os Mojave to my PC but I am unable to boot from my USB.
every i boot from usb after apple logo loading the display goes turn off. Just like display disconnected.
I follow a guides about intel graphics framebuffer patch (https://www.tonymacx86.com/threads/guide-intel-framebuffer-patching-using-whatevergreen.256490/) but I am unable to complete guide because i didn't understand the guide.
. Can you please help me out to give a proper guide please...
If you solve your issue already then please upload your efi folder for a better help..thanks
 
nobin118960 said:
Hello aquilaa,
Hi I am new to hackingtosh. I want to install mac os Mojave to my PC but I am unable to boot from my USB.
every i boot from usb after apple logo loading the display goes turn off. Just like display disconnected.
I follow a guides about intel graphics framebuffer patch (https://www.tonymacx86.com/threads/guide-intel-framebuffer-patching-using-whatevergreen.256490/) but I am unable to complete guide because i didn't understand the guide.
. Can you please help me out to give a proper guide please...
If you solve your issue already then please upload your efi folder for a better help..thanks
Click to expand...
The easiest solution would be to use an other Mac to install the operating system on the hard drive you intent to use, install the latest clover on that drive, then copy my efi folder to the efi partition on the drive. Since the lag on startup doesn't bother me at all, and the lan error hardly occurs I don't intent to fix that. I tried a quick Catalina install on another hard drive without succes so far
 
aquilaa said:
The easiest solution would be to use an other Mac to install the operating system on the hard drive you intent to use, install the latest clover on that drive, then copy my efi folder to the efi partition on the drive. Since the lag on startup doesn't bother me at all, and the lan error hardly occurs I don't intent to fix that. I tried a quick Catalina install on another hard drive without succes so far
Click to expand...
ok can you please upload the refi folder here...
 
Hello - For those who have gotten the Gigabyte Z390 UD working, what bios rev are you using? I upgraded my board to the lastest version, which was F10a, then tried F9. I can't even boot off a USB drive to start the install. I see kernal panics. Tried vanilla and unibeast but no luck and various EFI folders, but can't get it to even get me to the macos install point from the usb drive. Tried USB2 hubs, various ports, usb2 and usb3 drives, no luck.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top