Contribute
Register

No Sound - AppleHDA Realtek Audio

Status
Not open for further replies.
I've tried using iTunes & VLC.

I've also connected speakers to all 3 outputs (microphone, line out, and speaker) and cycled through the line out & internal speaker options.

Nothing works.
 
micahbrubin said:
I've tried using iTunes & VLC
Click to expand...
iTunes only
micahbrubin said:
I've also connected speakers to all 3 outputs (microphone, line out, and speaker) and cycled through the line out & internal speaker options.
Click to expand...
Trial and error never works for trouble shooting audio.
Each audio port maps to one audio device. Impossible to find the cases that work when virtually all of the cases you tried will never work.
Last request, Post #1/I. No Sound/1. Audio Outputs/1. Speakers
Do each step exactly
Reply with IOReg
 
Build 1
MAXIMUS VII IMPACT |  i7 4770K |  Radeon Other
Build 2
GA-Z97N-WiFi |  i5 5675C |  HD 6200
Thank you for the quick reply.

I followed the exact instructions and still no sound.

Headphones ARE recognized when plugged into the front headphone output.

Attached are IOReg files with only speakers connected, only headphones in the front output, and with both speakers and headphones connected concurrently.

Thank you.
 

Attachments

  • iMac-headphone connected only.ioreg
    4.4 MB · Views: 153
  • ioreg-SpeakersOnly.ioreg
    4.3 MB · Views: 175
  • ioreg-Headphones and speakers-MR.ioreg
    4.3 MB · Views: 152
Last edited:
micahbrubin said:
Attached are IOReg files with only speakers connected, only headphones in the front output, and with both speakers and headphones connected concurrently.
Click to expand...
IOReg shows:
a. Speaker only, working
b. Headphones only, working
c. Speakers and Headphones, same as b; headphones mutes speakers

If no sound, try another method
a. See AppleHDA Realtek Audio/Post #1/VIII. Uninstall Realtek ALC AppleHDA/1. cloverALC ...
b. See AppleHDA Realtek Audio/Post #1/II. AppleHDA Realtek Audio Methods/2. vit9696/AppleALC
 
Build 1
MAXIMUS VII IMPACT |  i7 4770K |  Radeon Other
Build 2
GA-Z97N-WiFi |  i5 5675C |  HD 6200
Thank you for the reply.

I attempted the other sound methods and the Clover ALC command got my sound recognized, but still no sound from the speakers.

The Lilu method also appeared to get the sound recognized but no output from the cpu.

The Multibeast method broke sound (i've attached the ioreg report).

I purchased a USB sound card and using that, I had sound through the speakers, etc.

At this point It seems my board's sound ports are fried and I should just use the USB sound.

I 110% appreciate your help and am guessing you agree?
 

Attachments

  • ioreg-reprort-post-Multibeast.ioreg
    3.6 MB · Views: 139
My signal microphone is not working . Can't you help me fix it? I tried install audio with multibeast (guide audio for 300 series motherboard). Thanks in advanced.
 

Attachments

  • mic_problems.zip
    861.6 KB · Views: 138
thienquang199x said:
This is my config.plist
Click to expand...
Audio working as designed.
Audio ID: 2 repurposes motherboard Pink (internal microphone) to Orange (line out), use front panel Pink (line in)
Otherwise, set Audio ID: 1 for motherboard Pink (internal microphone); set config.plist/Devices/Audio/Inject/1
 
Build 1
MAXIMUS VII IMPACT |  i7 4770K |  Radeon Other
Build 2
GA-Z97N-WiFi |  i5 5675C |  HD 6200
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top