Contribute
Register

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Status
Not open for further replies.
lubomir77 said:
This is vanilla install what I tried. But I can't boot as you seen in the picture (stopped on the line). I booting by the clover on USBinstaller. I will try repair USBinstaller but I am not sure if it will by help. All files is from the Jul 16, 2018 at 11:57 PM is one new installation.
Click to expand...

Read the guide I already linked (and which is linked from post #1) for correct drivers64UEFI content.
 
Can I get windows 10 through BootCamp up and running with the GTX960M Card ?
Gotta play some Games :p
 
RehabMan said:
Read the guide I already linked (and which is linked from post #1) for correct drivers64UEFI content.
Click to expand...

Dear RehabMan - I found in the playlist patch which stop me in boot. What is this patch? Because Backlight is still no working I think so there is some conflict between audio and backlight because I can't get booth.

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Comment</key>

<string>change EC0 to EC</string>

<key>Find</key>

<data>RUMwXw==</data>

<key>Replace</key>

<data>RUNfXw==</data>

</dict>

</plist>
 
lubomir77 said:
Dear RehabMan - I found in the playlist patch which stop me in boot. What is this patch? Because Backlight is still no working I think so there is some conflict between audio and backlight because I can't get booth.

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Comment</key>

<string>change EC0 to EC</string>

<key>Find</key>

<data>RUMwXw==</data>

<key>Replace</key>

<data>RUNfXw==</data>

</dict>

</plist>
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
If I clone my hard drive to a ssd will it still work ?
 
ok first of all thank you so much for the guide and your work i've used this guide since El Capitan and it has always been flawless!!
now i have a question... i need to run Virtual Machines on this hackintosh. i've Enabled VT on my bios and removed dart=0 from the config file and everything works mac os boots up i can install and run my VMs. now my question is:
1. is this normal and was there a reason for VT being disabled and dart=0 present in config file?
2. and will VT enabled with dart=0 removed break my os in the future?
 
Does the wifi card have to be the exact part number listed? I bought BCM94352Z but it looks different than the lenovo pn.
 
amoo_manoo said:
ok first of all thank you so much for the guide and your work i've used this guide since El Capitan and it has always been flawless!!
now i have a question... i need to run Virtual Machines on this hackintosh. i've Enabled VT on my bios and removed dart=0 from the config file and everything works mac os boots up i can install and run my VMs. now my question is:
1. is this normal and was there a reason for VT being disabled and dart=0 present in config file?
2. and will VT enabled with dart=0 removed break my os in the future?
Click to expand...

Enabling VT-x in BIOS is always ok.
It is VT-d that is the issue.
It is possible VT-d is already disabled by default (even with VT-x enabled).
dart=0 is to avoid problems with VT-d.
Note also that the repo drops DMAR which is also used to avoid problems with VT-d.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top