Contribute
Register

Help - Installing Sierra but get stuck on the restart during the install

Status
Not open for further replies.
marcogmonteiro

marcogmonteiro

Joined
Feb 22, 2018
Messages
5
Motherboard
Gigabyte Z270x-Ultra Gaming
CPU
Intel Core i5-7600K
Graphics
Gigabyte Geforce GTX 1050ti
Hi there,

first let me give you guys my build:
Board: Gigabyte Z270x-Ultra Gaming
i5-7600k
Graphics card: Gigabyte Geforce GTX 1050ti

I changed all I needed on my bios, then I start the install process. Formated the harddrive has intended, the process starts, then it restarts as normal but when I boot up I always get stuck at the apple logo.

Anything I could try next?

thanks.
 
Hi there, thanks for the reply. Here's the bit it got stuck.

qdwngLu.jpg


Thanks,
 
P1LGRIM said:
Boot with nv_disable=1 until you have installed the OS and the web drivers.
Click to expand...

I have it like that while getting those results. In my boot args I have: dart=0 nv_disable=1 -v
 
hdmi from the nvidea graphics card. Should I disable the nvidea graphic card in bios and use the inboard one?
 
Quick update, getting the same result (diying at the same place) with the onboard graphic card connected to the monitor.
 
marcogmonteiro said:
Should I disable the nvidea graphic card in bios and use the inboard one?
Click to expand...
Yes if you want to troubleshoot everything twice.

May need to install Lilu.kext and NvidiaGraphicsFixup.kext.

It looks like you may have USB problems too :
Ensure that Fast Boot is not enabled in your BIOS settings.
May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/.
May need PMHeart’s patch to remove XHCI USB Port Limit to /Volumes/EFI/EFI/CLOVER/config.plist.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top