[Solved] Is it H81M-D2V compatible?

Hello,

Does anyone run macos on Gigabyte H81M-D2V? I lose so much time to try different configurations with clover with no success.

So my configuration is:
Motherboard: Gigabyte H81M-D2V
CPU: i5-4460
GPU: (integrated) Intel® HD Graphics 4600
SSD: ADATA SX930

This guide states that it works in 10.11.5 so it ought to be upgradeable too.

The Rules said:

Profiles need to contain at least your primary system to assist others with helping you

Click to expand...

If you have additional builds please create a build signature.

e01 said:

Hello,

Does anyone run macos on Gigabyte H81M-D2V? I lose so much time to try different configurations with clover with no success.

So my configuration is:
Motherboard: Gigabyte H81M-D2V
CPU: i5-4460
GPU: (integrated) Intel® HD Graphics 4600
SSD: ADATA SX930

Click to expand...

Disable 3rd party USB 3 in firmware settings, with widely recommended BIOS settings you shouldn't need any special Clover configuration to boot.

I tried this guide few days ago, and without success too. It freeze on the booting progress bar.

Only working macos is on my macbook pro, but I would like to install on my desktop too.

I will try again, thanks.

e01 said:

I tried this guide few days ago, and without success too. It freeze on the booting progress bar.

Only working macos is on my macbook pro, but I would like to install on my desktop too.

I will try again, thanks.

Click to expand...

You only need FakeSMC + Realtek Ethernet kext. Clover defaults or a simple config.plist should be good to get you to the desktop/installer.

I don't know what's wrong, but now I even cannot boot the installer. Tried HS and Sierra few times

Off - Topic (H81M-D2V compatible)

Post in Sierra or high Sierra Desktop support for assistance. When installing an operating system, it is good practice to remove 'other' operating systems from the computer to avoid unnecessary issues.
https://www.tonymacx86.com/forums/linux.133/

Sierra and High Sierra desktop support;
https://www.tonymacx86.com/categories/installation.128/

After some iterations, finally, I get HS installed. I fixed the missing installer boot when removing the ".IAPhysicalMedia" from the bootable usb.

The installation was smooth, I have enable the LAN and Audio drivers so, they are working.

My problems right now are:
1. The slow booting (take minutes even when adding -lilubeta)
2. Graphics acceleration. My GPU seems to be Intel HD 4600, and it seems it's not recognized propertly. I have tried a lot of compination with changing ids, and fakeid, adding intel injection, none of them seems to works.

If somebody using similar configuration with such CPU, please advice.

I made a hs build with your hardware just few days ago, it works very easily without any problem.
This is the wrong section u should open a new tread on hs desktop support, by the way u install 10.13.3 or 13.4?

10.13.4 (latest from the appstore), but I don't think the problem is HS related

I am curious where I am failing, because I was followed guides exact step by step.
Creating USB with unchecked ATI and Nvidia
Installing on ssd drive (without problems)
From multibeast, using quick start, and select only Realtek ALC887/888b and Intel Graphics Fixups