Contribute
Register

(Success) i7 8700K GA-z370 Aorus Gaming 7

Status
Not open for further replies.
buyjoey said:
So, did you format the m.2 before the installation? by APFS?
Click to expand...
After initial instal from USB I opened DU and "Erased" using MACOS Extended Journaled and named the drive same Hackintosh . After removing the Windows SSD from the machine I started over and re formatted the SSD using same method and name. Still getting same error.
 
Chegelheimer said:
After initial instal from USB I opened DU and "Erased" using MACOS Extended Journaled and named the drive same Hackintosh . After removing the Windows SSD from the machine I started over and re formatted the SSD using same method and name. Still getting same error.
Click to expand...


if you are using, 10.13.3 in your USB, I think you need to replace the EFI cuz EFI's clover version is old. If your USB has 10.13.2, it is fine. But just in case I will make it for you give me more time.
 
buyjoey said:
if you are using, 10.13.3 in your USB, I think you need to replace the EFI cuz EFI's clover version is old. If your USB has 10.13.2, it is fine. But just in case I will make it for you give me more time.
Click to expand...

So use this EFI for 10.13.3 USB,
 

Attachments

  • EFI.zip
    21.9 MB · Views: 198
buyjoey said:
And do you install 10.13.3 or 10.13.2?
Click to expand...
Sorry but where do I find which one I am installing? lol
buyjoey said:
if you are using, 10.13.3 in your USB, I think you need to replace the EFI cuz EFI's clover version is old. If your USB has 10.13.2, it is fine. But just in case I will make it for you give me more time.
Click to expand...
That EFI is causing a constant reboot not getting to install options at all... Tried fresh instal and was gonna reformat drive but if I boot from USB or boot from Hackintosh drive I previously made it just restarts before actual instal

Where can I see the exact version? You're referring to the HS install version? In my current MBP applications folder where the Instal HS resides it states it is version 13.3.02. Clover is CC Vibrant Edition not seeing a 10.13.2
 
Ok, So you are using a MBP. So what is your MBP High sierra verion? in about your mac.
 
I am not running HS in my MBP I am running Yosemite 10.10.5 didn't know that would make a difference if I was putting HS not he USB ...
buyjoey said:
Ok, So you are using a MBP. So what is your MBP High sierra verion? in about your mac.
Click to expand...

Ahh I am not running HS on the MBP I am running Yosemite... 10.10.5 But have downloaded HS in the applications folder for the Hack
Didn't think the OS on the MBP mattered
 
I made a Covo session for you, join me.
 
buyjoey said:
Ok, So you are using a MBP. So what is your MBP High sierra verion? in about your mac.
Click to expand...
Should i just update my MPB and that would solve this issue?
 
Hello there,

I'm struggling to get my USB3.1 (The integrated ASMedia) at full speed ie 10GB, it shows only 5Gb/s on the attached USB 3.1 port/ I'm using an USB HDD with 3.1 connector. This same HDD when plugged in my Macbook Pro 2017 shows 10 Gb/s speed.
So do you guys have really 10 Gb speed ( ie USB 3.1Gen 2 speed ) with the Aerus Gaming 7/5/U?
What configuration USBInjectAll.kext and config.plist parameter are you using ?

In the other hand, I have my Nvidia 1080ti working great. Audio is ok when I plug an HDMI monitor, but no sound when I plug my DP monitor ?

I'm using this ssdt attached, located in my ACPI/patched EFI folder.

Is it normal to not have audio thru DP for Pascal GPUs ? Do we need to patch a kext in clover ?

Any help appreciated !

Many thanks
 

Attachments

  • USBInjectAll.kext.zip
    16.3 KB · Views: 109
  • SSDT-NVDA.aml
    2.6 KB · Views: 211
Last edited:
yassinex said:
Hello there,

I'm struggling to get my USB3.1 (The integrated ASMedia) at full speed ie 10GB, it shows only 5Gb/s on the attached USB 3.1 port/ I'm using an USB HDD with 3.1 connector. This same HDD when plugged in my Macbook Pro 2017 shows 10 Gb/s speed.
So do you guys have really 10 Gb speed ( ie USB 3.1Gen 2 speed ) with the Aerus Gaming 7/5/U?
What configuration USBInjectAll.kext and config.plist parameter are you using ?

In the other hand, I have my Nvidia 1080ti working great. Audio is ok when I plug an HDMI monitor, but no sound when I plug my DP monitor ?

I'm using this ssdt attached, located in my ACPI/patched EFI folder.

Is it normal to not have audio thru DP for Pascal GPUs ? Do we need to patch a kext in clover ?

Any help appreciated !

Many thanks
Click to expand...

Hi, for USB 3.1, I have the same issue not full speed. But for DP sound is good to me. I had Titan xp as well and it was good to work for sound as well. The only kext I used for the latest appleALC. I have no SSDT. You might need the fakepciid kexts.


Try it and let me know.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top