Contribute
Register

BCM94360CS2 + NGFF M.2 Key A/E Bluetooth does not work

Status
Not open for further replies.
Joined
Mar 12, 2015
Messages
1
Motherboard
Gigabyte Z270N-WIFI
CPU
Intel Core Kabylake i7-7700
Graphics
GTX 1080
Mac
  1. Mac mini
Hello,

I just build a new platform with a Z270N-WIFI and BCM94360CS2 + NGFF M.2 Key A/E
Wifi works well without doing anythings.
But Bluetooth does not work.
The os 10.12.6 can not find the device for bluetooth.
Any help? Does anyone already have this issue ?
 
Hello,

I just build a new platform with a Z270N-WIFI and BCM94360CS2 + NGFF M.2 Key A/E
Wifi works well without doing anythings.
But Bluetooth does not work.
The os 10.12.6 can not find the device for bluetooth.
Any help? Does anyone already have this issue ?

I have this issue too
 
I have a similar problem with my new Z270NWifi/7700K system, Zebra. Everything else appears to be working fine. I purchased a BCM94360CS2 card plus M2 adapter. Installation was a bit fiddly as I had to unscrew the metal shield around the M2-Wifi slot as the BCM94360CS2 card+adapter are a lot taller than the original Intel card. However, once that shield was removed, installation was easy. Wifi worked straightaway but, although the BCM94360CS2 card is visible in IOReg and System report as a USB device, no bluetooth is detected. The bluetooth tab in System report says "No information found."

I thought that it might be a problem with the M2-wifi slot's USB connection and so used an appropriate SSDT-USB file for my mobo, courtesy of KayliZenner on this thread page-70, but still no bluetooth. I did consider that I might need to use the Broadcom firmware updater kexts but I understand that these should not be required for the BCM94360CS2 card. My other thought was that could it be that my iMac18.3 system definition is the problem.

I would be most grateful for any advice. Am happy to upload additional files if required.
 

Attachments

  • IOReg Zebra.ioreg
    3.8 MB · Views: 307
  • SSDT-USB.dsl
    4.7 KB · Views: 342
I'm going to add some confusion to this... but maybe it will help.

My new build is a High Sierra Z270N-WIFI/i5-7500 system using an M2 adaptor and a BCM94360CS2 card also.

However... My Bluetooth works GREAT*, but I don't have any WiFi.

I have purchased 3 different BCM94360CS2 cards thinking they were defective and I have a 2nd M2 adaptor arriving Monday. Each gives the same results... Bluetooth works great, No WiFi.

I've also wondered if it's the iMac18,3 setting however, I've tried others system settings with the same results.



(* The Bluetooth picks up my Denon receiver on the other side of the house. Something my older systems couldn't do.)
 

Attachments

  • Screenshot 2017-10-22 13.14.58.png
    Screenshot 2017-10-22 13.14.58.png
    113.2 KB · Views: 441
  • Screenshot 2017-10-22 13.15.14.png
    Screenshot 2017-10-22 13.15.14.png
    44 KB · Views: 467
  • Screenshot 2017-10-22 13.15.39.png
    Screenshot 2017-10-22 13.15.39.png
    65.7 KB · Views: 415
  • H270N-WIFI IOReg.zip
    763.7 KB · Views: 78
  • config.plist
    7.9 KB · Views: 292
I have the exact same issue with the BCM94360CS2 bluetooth working but no wifi :banghead: - did you find any solution for this. Was considering to order new parts too thinking they were faulty?

I have spent this weekend trying out various installations to see if anything changes but had no luck with wifi working on mackintosh or even windows. The bluetooth aspect works perfectly fine on both os but no wifi...

any help would be greatly appreciated. o_O
 
Last edited:
@vc2017, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.
 
Sorry - updated thanks :)

Same motherboard (Asrock z270 fatal1ty itx) with high sierra and SMBIOS 18,3 ... Wifi works bluetooth doesn't.
 
Status
Not open for further replies.
Back
Top