- Joined
- Oct 20, 2017
- Messages
- 11
- Motherboard
- MSI Z370M
- CPU
- Intel i5-8600K
- Graphics
- ASUS Strix 1060GTX
I started moding G5 case back in 2014
Over the years I did 3 case.
The first 2 case all used laser hive back plates and internal mounting brackets.
They looked ok but I feel that back of the case has been ruined by the big cut outs.
With this project I set out to make the best looking G5 Hackintosh. I wanted go all out and make it the ultimate mod that has never been done before.
I wanted the case to keep all the original ports and the ports must work and retain much of the original internals as possible.
I also wanted the internals to be upgradable in the future.
Replace motherboard and CPU,
Upgrade graphics card.
Here is the result.....
I will place some photos of how I made this.
Over the years I did 3 case.
The first 2 case all used laser hive back plates and internal mounting brackets.
They looked ok but I feel that back of the case has been ruined by the big cut outs.
With this project I set out to make the best looking G5 Hackintosh. I wanted go all out and make it the ultimate mod that has never been done before.
I wanted the case to keep all the original ports and the ports must work and retain much of the original internals as possible.
I also wanted the internals to be upgradable in the future.
Replace motherboard and CPU,
Upgrade graphics card.
Here is the result.....
I will place some photos of how I made this.