Contribute
Register

[Success] Asus Z170i Pro Gaming - Sierra 10.12.5

Status
Not open for further replies.
For audio you just have to do this:

1) Install Clover.Configurator
2) Mount EFI and open the config.plist with Clover.Configurator
3) Disable SIP in Rt Variables --- csr-active-config 0x67 = SIP Disabled completely ---
4) Restart
5) Multibeast --- Drivers > Audio > RealtekALCXXX > 100 Series Audio --- Install
6) Restart
7) Multibeast --- Drivers > Audio > RealtekALC1150 --- Install
8) Restart
9) Enable SIP in Rt Variables --- csr-active-config 0x03 = SIP Enabled (Default on Hackintoshes) ---

Later you can also add a fix for sleep audio wake. But please, first install the audio correctly. I would suggest installing the OS X again in another partition - USB (for example) just for testing.

These are the steps I did, what is the sleep audio wake?and how to fix?
 
These are the steps I did, what is the sleep audio wake?and how to fix?

10) Download KextBeast
11) Download this kext
12) Install it and reboot. Not any flag required.


Is your audio working or it has never worked after following the steps posted before?
 
Audio is working whenever I boot Sierra from SSD Uefi partition with the pen drive with the installer plugged.If I remove the pen drive and I start up Sierra I hear no sound but the driver is installed.
 
Audio is working whenever I boot Sierra from SSD Uefi partition with the pen drive with the installer plugged.If I remove the pen drive and I start up Sierra I hear no sound!
Just do a clean install and it should be fixed.

Alternatively you could also do this first without the pen drive installed in all the process..

1) Install Clover.Configurator (LIKE ALWAYS)
2) Mount EFI and open the config.plist with Clover.Configurator (LIKE ALWAYS)
3) Disable SIP in Rt Variables --- csr-active-config 0x67 = SIP Disabled completely --- (LIKE ALWAYS)
4) Restart (LIKE ALWAYS)
5) (HERE IT CHANGES) Install ssdt_hdef-1-100-hdas.zip
6) Restart
7) MultiBeast --- Drivers > Audio > RealtekALC1150 --- Install
8) Restart
9) Enable SIP in Rt Variables --- csr-active-config 0x03 = SIP Enabled (Default on Hackintoshes) ---
 
Just do a clean install and it should be fixed.

Alternatively you could also do this first without the pen drive installed in all the process..

1) Install Clover.Configurator (LIKE ALWAYS)
2) Mount EFI and open the config.plist with Clover.Configurator (LIKE ALWAYS)
3) Disable SIP in Rt Variables --- csr-active-config 0x67 = SIP Disabled completely --- (LIKE ALWAYS)
4) Restart (LIKE ALWAYS)
5) (HERE IT CHANGES) Install ssdt_hdef-1-100-hdas.zip
6) Restart
7) MultiBeast --- Drivers > Audio > RealtekALC1150 --- Install
8) Restart
9) Enable SIP in Rt Variables --- csr-active-config 0x03 = SIP Enabled (Default on Hackintoshes) ---

It fixed with:
Thank you!
 
The sound broked again and I think cause updating Sierra, I'll make a new clean install and will update it after fixing sound or will disable.

Instead of formatting I installed audio again, just I got that sound didn't break: sometimes when I boot it's ok, others is very very low.
 
Last edited:
The sound broked again and I think cause updating Sierra, I'll make a new clean install and will update it after fixing sound or will disable.

Instead of formatting I installed audio again, just I got that sound didn't break: sometimes when I boot it's ok, others is very very low.

Please, take on consideration doing a clean restore. From 0, format your SSD-HDD after preparing an Unibeast USB and after that follow my tutorial and you will have a perfect working hackintosh.

Nice hackintoshing!
 
Im having trouble following the guide. How do you install Ethernet.kext without the bootloader?. I get a failure in MultiBeast.
I installed clover but it boots to a black screen.

Can you upload a copy of your config.plist.

I will try it all again in the morning.

Just uploaded in the 1st post.

Im having trouble following the guide. How do you install Ethernet.kext without the bootloader?. I get a failure in MultiBeast.

For the Ethernet, in the first boot (as you see in the video) Internet is perfectly working. However, after 1º boot from real SSD you lose the Ethernet capability. At this point you have two options:

- Hotspot using USB with 3G/4G from your phone
- As MultiBeast was copied to your USB, you must copy it in the hackintosh just installed OS, execute it and do this:
1) MultiBeast > Drivers > Network > Intel > IntelMausiEthernet v2.2.1d1
2) Restart

I installed clover but it boots to a black screen.

Please perform a clean install.

Anything else, support will be given :)
 
I used UniBeast to create an install of the macOS. I did a clean install, installed Clover 2.4k in ESP (EFI partition), and I still get black screen. It does not get past the ++++++++ signs. I tried with a FakeSMC, but no luck.

What options did you choose in Clover?

This is the first Multibeast installation I do

PbRqQDj.png


Please, tell me if you follow EXACTLY the guide from the forum doing a clean install. IT MUST WORK.
 
i have it all running, i dont know how you got the nvidia drivers to work but i had to use problem 6 in this thread
https://www.tonymacx86.com/threads/solving-nvidia-driver-install-loading-problems.161256/

i had to copy files from the drivers64uefi to the efi partition (emuvariableuefi-64.efi,osxaptiofix2drv-64.efi)

i believe in that process i had lost intels usb3.0 speed, its is back at 480mbs

running multibeast and the pkg fails when trying to reinstall - Increase Max Port Limit 100 Series
tried kext beast with usbinject-all.kext and the drives fail to display.

what did you do to get the nvidia drivers to stick after reboot?. i used your config.plist

i will try another clean install tomorrow.

Hi!

My Nvidia Web just works with the Nvidia Web Drivers from the installation notes I made on the post. Just download it and it will work after the reboot.

About the 3.0 usb, please, see the firsts answers on the post, I uploaded photos testing them. I think that 70-50 mbs is the maximum speed...

I didn't do any copy on the EFI partition, I really think that you should just do a clean install and follow the guide, as the GPU is 100% compatible. Here is the post which explains how to install it https://www.tonymacx86.com/threads/...for-macos-sierra-10-12-5-378-05-05-15.222102/ I just installed the driver, no changed on config.plist. HOWEVER, DON'T CHANGE IT, I DID THE CHANGE ON CONFIG.PLIST AND ENDED UP RESTORING THE HACKINTOSH. ANOTHER USER WITH THAT MOBO AND 1060 GPU HAD TO DO THE SAME.

Hope you can get it working..

Carlos.
 
Status
Not open for further replies.
Back
Top