Contribute
Register

[NEW / TESTING] Intel 7th Generation Kaby Lake CPUs + 200 Series Motherboards in macOS

Status
Not open for further replies.

Attachments

  • EFI-Backups.zip
    2.8 MB · Views: 71
erittalf said:
Mac App Store. I tried with a 2015 MacBook Pro and a 2015 Mini.
Click to expand...

Why did you attach an EFI-Backups folder?
You must attach the actual EFI/Clover you're booting from (without 'themes'... as per request).
 
I apologize. Correct zip attached. Thanks!
 

Attachments

  • EFI.zip
    1.8 MB · Views: 70
erittalf said:
I apologize. Correct zip attached. Thanks!
Click to expand...

Your config.plist is wrong.
You need to use FakeCPUID as per post #1 (you have it commented out/disabled).
Also, you don't have the correct settings for HD630...

Make sure you're using a USB2 stick. With USBInjectAll.kext (and probably without), none of your USB ports will work with USB3 devices (needs custom SSDT for USBInjectAll.kext, or port limit patch [short term]).
 
FakeCPUID is listed in Root>KernelAndKextPatches as 0x0506E3. Should I list it somewhere else in the .plist? I have been manually typing it within Clover during boot.
What or where are the correct HD630 settings?
I don't have a USB 2.0 stick, but will get one today. Thanks again.
 
I see the HD 630 fixes now. I misunderstood "post-install" as referring to macOS and not Unibeast.
 
erittalf said:
FakeCPUID is listed in Root>KernelAndKextPatches as 0x0506E3.
Click to expand...

No.
You have '#FakeCPUID' not 'FakeCPUID'... Clover will not read the setting at '#FakeCPUID'.

What or where are the correct HD630 settings?
Click to expand...

Read post #1.
Hint:
config.plist/Devices/FakeID/IntelGFX=0x19168086
config.plist/Graphics/ig-platform-id=0x19120000
 
Just tried it with a USB 2.0 device and all modifications you listed. Still stuck at same location. New zip attached.
 

Attachments

  • EFI2.zip
    1.8 MB · Views: 73
erittalf said:
Just tried it with a USB 2.0 device and all modifications you listed. Still stuck at same location. New zip attached.
Click to expand...

You did not put ig-platform-id in the correct location.
Also you spelled it incorrectly. Should be 'ig-platform-id' not 'ig-platform-ID'.

Read post #301 carefully.
Also, you can use an invalid ig-platform-id (0x12345678) to eliminate graphics related issues. It is useful to narrow the problem.
 
I apologize for the misspell oversight and location. I made adjustments and tried with config.plist/Graphics/ig-platform-id=0x19120000 and config.plist/Graphics/ig-platform-id=0x12345678 , but no further progress has been made in terms of the boot process. I have optimized motherboard defaults and disabled VT-d also. Updated zip attached.
 

Attachments

  • EFI3.zip
    1.8 MB · Views: 99
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top