Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

Status
Not open for further replies.
RehabMan said:
Read post #1, "Final config.plist".



This plist has the wrong patch to change the port count.
You have, Find: <0600260a 01030303>
Should be: Find: <0600260a 01030403>

... as per post #6150
Click to expand...

Hello again and thanks for your patience

Here the my steps
1) I've generated final config as described in #1 so I used config_6x0s_G1_Haswell.plist for my 650 G1
2) Then I added two new items in the end
Find: <0600260a 01030303>
Replace: <0600260a 01030202>

Find: <01050900 00040000 87000000 02040900 00040000 87000000 03060300 00040000 87000000>
Replace: <03060300 00040000 87000000 ff000000 01000000 40000000 ff000000 01000000 40000000>

3) Renamed 16 item "Enable fourth connector by changing port count, 0x0a260006, RehabMan"
You have, Find: <0600260a 01030303>
Should be: Find: <0600260a 01030403>

4) Reboot
5) Plug in DP and close and reopen laptop
6) generated log

Thanks
 

Attachments

  • log.zip
    2.7 MB · Views: 85
KreiDer said:
Hello again and thanks for your patience

Here the my steps
1) I've generated final config as described in #1 so I used config_6x0s_G1_Haswell.plist for my 650 G1
2) Then I added two new items in the end
Find: <0600260a 01030303>
Replace: <0600260a 01030202>

Find: <01050900 00040000 87000000 02040900 00040000 87000000 03060300 00040000 87000000>
Replace: <03060300 00040000 87000000 ff000000 01000000 40000000 ff000000 01000000 40000000>

3) Renamed 16 item "Enable fourth connector by changing port count, 0x0a260006, RehabMan"
You have, Find: <0600260a 01030303>
Should be: Find: <0600260a 01030403>

4) Reboot
5) Plug in DP and close and reopen laptop
6) generated log

Thanks
Click to expand...

OK, you didn't do what was asked, but what you have is fine for testing (because you broke the original "fourth connector" patch, you made the later patch, that was entered incorrectly, work).

("two wrongs" do make a "right"... sometimes)

Now you can proceed with testing as you finally have a framebuffer with only the two required connectors.
Please test and report results.

Note: I'm not interested in scenarios that involve booting the laptop with HDMI plugged in. There are many known problems with that.
 
RehabMan said:
OK, you didn't do what was asked, but what you have is fine for testing (because you broke the original "fourth connector" patch, you made the later patch, that was entered incorrectly, work).

("two wrongs" do make a "right"... sometimes)

Now you can proceed with testing as you finally have a framebuffer with only the two required connectors.
Please test and report results.

Note: I'm not interested in scenarios that involve booting the laptop with HDMI plugged in. There are many known problems with that.
Click to expand...
it still doesn't work I plug in and nothing happened. Any insight or direction how to fix that. I have no idea :| The ireg present in previous message.

Thanks
 
KreiDer said:
it still doesn't work I plug in and nothing happened.
Click to expand...

You did not explain your testing procedures in detail.
Unfortunately, I'm not clairvoyant.
 
RehabMan said:
You did not explain your testing procedures in detail.
Unfortunately, I'm not clairvoyant.
Click to expand...
So system is loaded and I plug DP and close laptop as result black screen on external display so it doesn't work.

Thanks
 
KreiDer said:
So system is loaded and I plug DP and close laptop as result black screen on external display so it doesn't work.

Thanks
Click to expand...

Before you closed the laptop, both displays were working?
 
KreiDer said:
Work only display in laptop. External don't work. So nothing happene once I plug DP.
Click to expand...

Remove the patch mods. Go back to original repo config.plist. Test again. Report result.
 
Off the wall question. Is the ProBook line capable of using the Power Nap feature under SysPrefs -> Energy Saver? I understand that we have darkwake=0 set in config.plist which effectively disables it, so I'm curious if they are even capable of using it?
 
RehabMan said:
Remove the patch mods. Go back to original repo config.plist. Test again. Report result.
Click to expand...

I've updated config as you mentioned but the same result as before

Work only display in laptop. External don't work. So nothing happened once I plug DP.

Thanks
 

Attachments

  • log.zip
    2.7 MB · Views: 91
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top