- Joined
- Jan 13, 2017
- Messages
- 267
- Motherboard
- Gigabyte Designare Z390
- CPU
- i9 9900K
- Graphics
- RX580
- Mac
- Classic Mac
- Mobile Phone
Hi I need little help to fix my problem So
Machine is
GA Z97x-SLI
I7 - 4790k
32DDR3 - 1600mhz
EVGA GTX 970 - 4GB
1 display - 29' Ultra Wild 2560x1080 - DP cable
So I need to fix 2 problems
1. Is Link Speed are recognize like 2.5 GT/s
2. Wen boot after apple logo machine do black screen and I sould turn OFF monitor wait 2 sec and again turn ON and everything work good after that.
So I attack some screen shoot.
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 13c2 (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Unknown device 2972
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable)
Region 1: Memory at <ignored> (64-bit, prefetchable)
Region 3: Memory at <ignored> (64-bit, prefetchable)
Region 5: I/O ports at e000
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee00000 Data: 4071
Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] #10de
Capabilities: [13c] #110
after lspci -vv .. system give me this result.
So I have only 2 SSDT patched SSDT is for CPUPowerManager for i7-4790K
and SSDT-HDMI-NVIDIA_PEG0 this if for DisplayPort audio.
And I attack my IORegistryExplorer
so can some one tell me what I should change to fix my problem, thanks a lot for all who will give me hand.
Machine is
GA Z97x-SLI
I7 - 4790k
32DDR3 - 1600mhz
EVGA GTX 970 - 4GB
1 display - 29' Ultra Wild 2560x1080 - DP cable
So I need to fix 2 problems
1. Is Link Speed are recognize like 2.5 GT/s
2. Wen boot after apple logo machine do black screen and I sould turn OFF monitor wait 2 sec and again turn ON and everything work good after that.
So I attack some screen shoot.
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 13c2 (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Unknown device 2972
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable)
Region 1: Memory at <ignored> (64-bit, prefetchable)
Region 3: Memory at <ignored> (64-bit, prefetchable)
Region 5: I/O ports at e000
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee00000 Data: 4071
Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] #10de
Capabilities: [13c] #110
after lspci -vv .. system give me this result.
So I have only 2 SSDT patched SSDT is for CPUPowerManager for i7-4790K
and SSDT-HDMI-NVIDIA_PEG0 this if for DisplayPort audio.
And I attack my IORegistryExplorer
so can some one tell me what I should change to fix my problem, thanks a lot for all who will give me hand.
Attachments
-
Screen Shot 2017-03-26 at 19.22.41.png104 KB · Views: 118
-
Screen Shot 2017-03-26 at 19.23.05.png116.6 KB · Views: 122
-
Screen Shot 2017-03-27 at 00.06.57.png105.8 KB · Views: 140
-
Screen Shot 2017-03-27 at 00.06.47.png124.6 KB · Views: 124
-
Screen Shot 2017-03-27 at 00.06.47.png124.6 KB · Views: 135
-
Screen Shot 2017-03-27 at 00.06.53.png102.5 KB · Views: 131
-
F4-original.zip38.2 KB · Views: 68
-
SSDT-HDMI-NVIDIA-PEG0.aml458 bytes · Views: 131
-
SSDT.aml2.2 KB · Views: 157
-
Screen Shot 2017-03-27 at 01.20.01.png223.7 KB · Views: 135