Contribute
Register

my planned mATX build

Status
Not open for further replies.
Joined
Feb 22, 2017
Messages
24
Motherboard
Gigabyte Z170MX-Gaming 5
CPU
Intel i9 6700K
Graphics
NVIDIA GTX 980 TI
Hi everyone

This is my first post. I'm just another disappointed Macuser who tries to go a different way. ;)
I'm just done with my shopping list, so here it is, accompanied with the question, if this can be done with success: (it's basically the CustoMac mATX build recommendation of February 2017)

Will the graphics card fit the board and the case?
Will the SSD M.2 work in this configuration?
Should/Could I also go with a Z270 board?

Thanks in advance for helping a hackintosh-noob!

(I already own the graphics card and ram, because I found them for cheap in an auction.)


Motherboard:
Gigabyte GA-Z170MX-Gaming 5 https://www.amazon.com/dp/B014W200G0/?tag=tonymacx86com-20

CPU:
Core i7-6700K
https://www.amazon.com/dp/B012M8LXQW/?tag=tonymacx86com-20

CPU Cooler:
Corsair H60 (Water)
https://www.amazon.com/dp/B00A0HZMGA/?tag=tonymacx86com-20

Graphics Card:
EVGA GTX 960 4GB ACX 2.0 4GB
https://www.amazon.com/dp/B01BX3FAWU/?tag=tonymacx86com-20

RAM:
Crucial Ballistic Sport LT 2x8GB
https://www.amazon.com/dp/B00MTSWFMM/?tag=tonymacx86com-20

Drive:
Samsung 850EVO M.2 SATA 500GB
https://www.amazon.com/dp/B00TGIW1XG/?tag=tonymacx86com-20

PSU:
Corsair CS 550 Watt
https://www.amazon.com/dp/B00GH9NA6O/?tag=tonymacx86com-20

Case:
BitFenix Phenom M
https://www.amazon.com/dp/B00G483C7A/?tag=tonymacx86com-20

WIFI:
Broadcom BCM94360CS
http://www.ebay.com/itm/Broadcom-BC...295903?hash=item3ab81214df:g:6BEAAOSwfZ1WX0eA
 
Last edited:
Hi everyone

This is my first post. I'm just another disappointed Macuser who tries to go a different way. ;)
I'm just done with my shopping list, so here it is, accompanied with the question, if this can be done with success: (it's basically the CustoMac mATX build recommendation of February 2017)

Will the graphics card fit the board and the case?
Will the SSD M.2 work in this configuration?
Should/Could I also go with a Z270 board?

Yes, the graphics card should fit.

Yes, the M.2 SSD should work fine.

I would stick with a Z170 board at this point; the 200 series are not yet supported.
 
Allright, parts are ordered. You will here from me soon ;-).
Thanks!
Yes, good luck on your build. Take notes and snap some pics. Post your experience with it in User Builds. :thumbup:
 
Last edited:
Thanks, I will. (I got your original post by mail, good you redecided ;-))
Actually reread it. :) At first glance read the mobo as Z170X Gaming 5. Which is ATX. Too early in the AM to be posting.
Where's my coffee ?
 
My Hack is working (so far)!
Installation was easier than I expected. I'll try to post some more details when I can spare a minute.

The PSU became now a Corsair CS 650W, because I found one for 50 bucks. The Wireless/Bluetooth option is not yet installed. I will head for a combined pci-e solution. Details to come.

Thanks for your support!

EDIT:
The Wireless/Bluetooth card just arrived, works out of the box with no additional installation!
 
Last edited:
Status
Not open for further replies.
Back
Top