Contribute
Register

[Guide] Booting the OS X installer on LAPTOPS with Clover

I success the installer now,thanks helps.
I have following question.
How can i fix brightness control?
How can i fix sound working?
How can i fix wifi?
How can i fix 7mb graphic card memory issue?

Thanks..
 
How can i add this option enabled in config.plist
 

Attachments

  • IMG_1299.JPG
    IMG_1299.JPG
    2.5 MB · Views: 110
dgnzcn said:
I success the installer now,thanks helps.
I have following question.
How can i fix brightness control?
How can i fix sound working?
How can i fix wifi?
How can i fix 7mb graphic card memory issue?

Thanks..
Click to expand...

Graphics would be working if you followed the guide correctly (correct config.plist + FakePCIID.kext + FakePCIID_Intel_HD_Graphics.kext).

Your other questions are covered in the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
 
My config:
System: HP 15-bc011nf
bootloader(Clover)
CPU: i7-6700HQ
Graphics: HD530, 1920*1080

Firstly, please apologize for my bad english...
I follow your guide (reading eveything I found since 2 days) but I have a kernel panic. Always the same!

I have taken the following ktext:
FakeSMC.kext, VoodooPS2Controller.kext, GenericUSBXHCI.kext
and the following config.plist (config_HD520_530_540.plist (attached to this post)), I think it's the right one, isn't it ?
Then, I have downloaded OS x Sierria from the App Store and copied it my USB. Everything worked well until the boot!

I had the following error:
IMG_20170223_001503.jpg
Consequently, I thank it was due to I have a Skylate and so the DVMT-prealloc. However I can't set it to 64mb in my BIOS. And I didn't well understand how activate the minStolenSize...
I tried to add the following flags : "maxmem=64 and GraphicsEnabler=yes". But there was still the same error.

So I read the following articles : https://www.tonymacx86.com/threads/guide-dell-inspiron-15-7559-skylake-i7-6700hq-intel-hd-530-using-clover.191921/ and https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
So, I used the followings ktext: FakePCIID.kext, FakePCIID_Intel_HD_Graphics.kext, FakeSMC.kext, VoodooPS2Controller.kext.
But now, it's the following error :
IMG_20170223_185416.jpg

Please, help me to solve this problem!
Thanks in advance and one more time, sorry my english.
 

Attachments

  • config.plist
    8.5 KB · Views: 179
bobo159951 said:
My config:
System: HP 15-bc011nf
bootloader(Clover)
CPU: i7-6700HQ
Graphics: HD530, 1920*1080

Firstly, please apologize for my bad english...
I follow your guide (reading eveything I found since 2 days) but I have a kernel panic. Always the same!

I have taken the following ktext:
FakeSMC.kext, VoodooPS2Controller.kext, GenericUSBXHCI.kext
and the following config.plist (config_HD520_530_540.plist (attached to this post)), I think it's the right one, isn't it ?
Then, I have downloaded OS x Sierria from the App Store and copied it my USB. Everything worked well until the boot!

I had the following error:
View attachment 237955
Consequently, I thank it was due to I have a Skylate and so the DVMT-prealloc. However I can't set it to 64mb in my BIOS. And I didn't well understand how activate the minStolenSize...
I tried to add the following flags : "maxmem=64 and GraphicsEnabler=yes". But there was still the same error.

So I read the following articles : https://www.tonymacx86.com/threads/guide-dell-inspiron-15-7559-skylake-i7-6700hq-intel-hd-530-using-clover.191921/ and https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
So, I used the followings ktext: FakePCIID.kext, FakePCIID_Intel_HD_Graphics.kext, FakeSMC.kext, VoodooPS2Controller.kext.
But now, it's the following error :
View attachment 237953

Please, help me to solve this problem!
Thanks in advance and one more time, sorry my english.
Click to expand...

The panic shows you're not using the kexts as linked from the guide.
 
Oh that's that! Thanks a lot. You're a genius ! (I used old versions because the links are broken... you have to delete the "/download/" at the end of all the links)
Hopping that's the install will work :)
 
I will make it !
Thanks one more time.

The installation worked perfectly on my HDD. Then, I installed in dual boot Windows 10 on my SSD. However, the battery is stuck to 0%. I think it was a problem of os X (https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/) But when I boot on Windows the battery is also stuck to 0%... is it problematic ?
Furthermore, I can't start my PC if it is not plugged. How solve this big problem ?

Thanks in advance!
 
bobo159951 said:
I will make it !
Thanks one more time.

The installation worked perfectly on my HDD. Then, I installed in dual boot Windows 10 on my SSD. However, the battery is stuck to 0%. I think it was a problem of os X (https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/) But when I boot on Windows the battery is also stuck to 0%... is it problematic ?
Furthermore, I can't start my PC if it is not plugged. How solve this big problem ?

Thanks in advance!
Click to expand...

You must install Clover to your SSD or HDD in order to boot without USB. Must also be configured as you did for USB (drivers64UEFI, kexts, config.plist, etc).

And you must insure that BIOS is set to boot into Clover. Read post #2.

Battery guide is linked from the FAQ. Off-topic here.
 
I managed to boot the Sierra installer and have my SATA drive detected, but when the install is finished I land on a firmware screen saying that the system time is invalid due to dead CMOS battery.
When I boot the installed macOS I tells me it was unable to install instead of booting to the desktop.
Here's the EFI/CLOVER folder I used for booting.

EDIT: I just noticed that on https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/
it is said "Note: For Broadwell and Skylake hardware, you must install 10.11", does this mean no 10.12 too?
 

Attachments

  • join.zip
    1.4 MB · Views: 79
Last edited:
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top