Contribute
Register

Gigabyte X99P-SLI Motherboard with Broadwell-E 6800k, some success/some problems

Status
Not open for further replies.

Attachments

  • Screen Shot 2016-10-10 at 4.45.41 pm.png
    Screen Shot 2016-10-10 at 4.45.41 pm.png
    93.4 KB · Views: 197
  • Screen Shot 2016-10-10 at 4.51.23 pm.png
    Screen Shot 2016-10-10 at 4.51.23 pm.png
    109.5 KB · Views: 175
Last edited:
royedmund said:
Downloaded NVMeP and KextBeast. Ran ./NVMeP -i on Desktop and then KextBeast.

Thanks to ekwipt
Now have access to Samsung 950 Pro NVMe SSD.
Click to expand...

Thanks to Micky1979 and PikerAlpha
 
ekwipt said:
Run this tool to get NVME drive working

http://www.insanelymac.com/forum/files/file/604-nvmep/

You have to use KextBeast to install rather than putting kext in clover folder
Click to expand...
Hey , you have your build working ?
I can't even boot mine ATM ;(
Is there a step by step guide for x99 Sli plus msi ..i7 6800k install ?? Aswell as up to date patching and kexts , the guides I'm following things aren't working and I'm guessing it's to do with things like this. (Being outdated )

Thanks
 
use a guide from haswell-e first, you have to change the FakeCPUID for a haswell with various bootflags, after install you can change to broadwell-e for FakeCPUid, there's some threads in the other forum how to get everything up and running
 
ekwipt said:
use a guide from haswell-e first, you have to change the FakeCPUID for a haswell with various bootflags, after install you can change to broadwell-e for FakeCPUid, there's some threads in the other forum how to get everything up and running
Click to expand...

Ok thanks I'll get back to researhing , I've only so far after a few goes started again , I've done a fresh install of unibeast drive , the settings were for uefi not legacy , now I'm kinda drawing blanks as to what to do since everyone's method is different from this point
 
I made mine with Clover only, no unibeast needed, I can link you to my EFI drive if you want, let me dig up some threads:

https://www.tonymacx86.com/threads/giacomoleopardos-workstation-triplet.199643/

that will get you started

http://www.insanelymac.com/forum/to...well-e-family-and-haswell-e-family/?p=2265662

that will help, you can copy peoples EFI once you get installed

Nmano is getting very far with X99 but other people including myself have Broadwell-e which is slightly different approach

this is my EFI (not my latest) not on my hack
 
IMG_1986.JPG
ekwipt said:
I made mine with Clover only, no unibeast needed, I can link you to my EFI drive if you want, let me dig up some threads:

https://www.tonymacx86.com/threads/giacomoleopardos-workstation-triplet.199643/

that will get you started

http://www.insanelymac.com/forum/to...well-e-family-and-haswell-e-family/?p=2265662

that will help, you can copy peoples EFI once you get installed

Nmano is getting very far with X99 but other people including myself have Broadwell-e which is slightly different approach

this is my EFI (not my latest) not on my hack
Click to expand...


Hey , if you link me your efi , what do I do ? Sorry for noobness I'm trying to understand so much in so little , I've followed a few different methods but just keep getting stuck. No boot , I've been getting to clover in verbose mode it's just giving me this
 
I followed the step by step and it's still working :/ will try again later on
 
follow the first link and read slowly, you should be able to get it to boot from this point, depending on your hardware differences, after that you could copy my EFI
 
Ill
ekwipt said:
follow the first link and read slowly, you should be able to get it to boot from this point, depending on your hardware differences, after that you could copy my EFI
Click to expand...


I'll try again today , but I just did it , question on the clover config , there's no Haswell kernel option ...? Any idea
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top