Audio - HDMI Audio AppleHDA [Guide]

zikman said:

i attached them at my previous post

Click to expand...

USELESS.
If you run the script again with a different answer, all the files change.
If you reboot, the files change.

toleda said:

USELESS.
If you run the script again with a different answer, all the files change.
If you reboot, the files change.

Click to expand...

uploading new ones and won't change anything till you reply to me..
thx again!

zikman said:

uploading new ones

Click to expand...

Boot log is missing.

toleda said:

Boot log is missing.

Click to expand...

here you are

zikman said:

here you are

Click to expand...

Not correct, Clover boot log. Post #1, Problem Reporting
8. Clover

1. EFI/CLOVER/config.plist
2. EFI/CLOVER/misc/debug.log (Set config.plist/Boot/Debug/YES)
   1. or DPCIManager/Misc/Boot Log

here you are

Hi, first time trying to enable HDMI audio but I can't seem to get it working, would appreciate if someone can help

Problem Reporting (post to this thread with requested files attached)

1. cloverHDMI does not detect my GTX 950, detects only my integrated HD4600 which I do not want to use
2. 10.12/GA-B85M-D3H/FD/Intel i5 4690/GTX 950
3. Used I used tonymacx86's guide https://www.tonymacx86.com/threads/new-automatic-hdmi-audio-script-released.184867/
4. Copy of IORegistryExplorer attached
5. Copy Of Console/All Messages (last boot) Not sure how to get this, I assume open Console application and click on file on the top right hand corner but there's no option to save a copy as
   1. Console/File/Save a Copy As...
6. System/Library/Extensions/AppleHDA.kext There's no AppleHDA.kext in my extensions folder
7. Chameleon I searched on this forum and it says that Chameleon is a legacy boot loader and I use Clover so I don't think I need to provide this
   1. Extra/org.chameleon.Boot.plist
   2. DPCIManager/Misc/Boot Log
   3. Extra/dsdt.aml (if installed)
   4. Extra/ssdt.aml
8. Clover
   1. EFI/CLOVER/config.plist attached
   2. EFI/CLOVER/misc/debug.log (Set config.plist/Boot/Debug/YES) Doesn't have debug.log in the folder and I don't see Debug option under Boot to set YES
      1. or DPCIManager/Misc/Boot Log I downloaded DPCIManager from source forge but I can't find the Boot Log
   3. EFI/CLOVER/ACPI/Patched/dsdt.aml (if installed) Theres no dsdt file so I assume it's not installed
   4. EFI/CLOVER/ACPI/Patched/ssdt.aml attached

toleda said:

Not correct, Clover boot log. Post #1, Problem Reporting
8. Clover

1. EFI/CLOVER/config.plist
2. EFI/CLOVER/misc/debug.log (Set config.plist/Boot/Debug/YES)
   1. or DPCIManager/Misc/Boot Log

Click to expand...

any help toleda please?

Hi toleda,

once again it's me - but now with a new mainboard: GIGABYTE Z170X SOC FORCE.
And a new problem with HDMI-Audio for AMD cards. But i think, you just have to point me in the right direction.

Problem - see IORegistryExplorer entry for the cards:

as you can see, they sit under PEG0@1/PEGP@0/pci-bridge@10 and PEG0@1/PEGP@0/pci-bridge@11.
So what do i have to change in the first few lines of your file "SSDT-HDMI-AMD-PEG0.aml":

- - - - -
DefinitionBlock ("", "SSDT", 1, "toleda", "ami789a", 0x00003000)
{
External (_SB_.PCI0.PEG0, DeviceObj) // Warning: Unknown object
External (_SB_.PCI0.PEG0.PEGP._ADR, UnknownObj) // Warning: Unknown object

Scope (\_SB.PCI0.PEG0)
{
- - - - -

my thought was, i have to enter some more information on the two "External..." lines and also then in the "Scope..." line,
but, as i am not a coder, i don't know what i have to enter there, to make it work. What do i have to enter for "pci-bridge@10" ?

For your need, i have attached the IORegEx file, so you can check the whole entry, if you find any time.
Thanx in advance...

Mork vom Ork

zikman said:

here you are

Click to expand...

Remove SSDT-HDMI and SSDT-HDEF. Run cloverHDMI.
Reply with new files.