Contribute
Register

USB boot on other laptop, but not mine.

Status
Not open for further replies.
Joined
Dec 3, 2011
Messages
12
Motherboard
Illegear Z5 (Clover)
CPU
i7-6700HQ / HM170
Graphics
HD530, 1920x1080, (nVidia 970m optimus)
Mobile Phone
  1. Android
Hi, i already follow several ways on how to prepare a bootable usb drive. And the latest one is via createinstallmedia and install latest clover. The usb works on most laptop, but not mine. Struggling since 2 weeks ago, but still no good news when it come to my laptop.
config.plist from rehabman (530)
kexts used: fakesmc, genericusb, voodoops2.

Here is the cpuz:
cpuz%20spec%20z5_zpsdue4znhn.png


Here the KP:
IMG_20160927_144136_zps7zdiuucj.jpg


help to get help from u all guys. Thanks a lot!
 
Hi, i already follow several ways on how to prepare a bootable usb drive. And the latest one is via createinstallmedia and install latest clover. The usb works on most laptop, but not mine. Struggling since 2 weeks ago, but still no good news when it come to my laptop.
config.plist from rehabman (530)
kexts used: fakesmc, genericusb, voodoops2.

Here is the cpuz:
cpuz%20spec%20z5_zpsdue4znhn.png


Here the KP:
IMG_20160927_144136_zps7zdiuucj.jpg


help to get help from u all guys. Thanks a lot!
did you check this post out: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
Hi, i already follow several ways on how to prepare a bootable usb drive. And the latest one is via createinstallmedia and install latest clover. The usb works on most laptop, but not mine. Struggling since 2 weeks ago, but still no good news when it come to my laptop.
config.plist from rehabman (530)
kexts used: fakesmc, genericusb, voodoops2.

Here is the cpuz:
cpuz%20spec%20z5_zpsdue4znhn.png


Here the KP:
IMG_20160927_144136_zps7zdiuucj.jpg


help to get help from u all guys. Thanks a lot!

Attach EFI/Clover folder (not EFI folder). Please strip Clover/themes before compressing as ZIP.
 
Attached. Thanks @RehabMan


Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

Oh ok. Didnt update signature since last hackintosh, sorry for that.

Signature updated. And the link of the laptop included in build signature below.
 
Last edited:
Oh ok. Didnt update signature since last hackintosh, sorry for that.

Signature updated. And the link of the laptop included in build signature below.

Try with USBInjectAll.kext. Also, you may have an issue with one of your SSDTs (USB related). Analyze them and drop the correct one, or drop each one at a time (trial/error).
 
Try with USBInjectAll.kext. Also, you may have an issue with one of your SSDTs (USB related). Analyze them and drop the correct one, or drop each one at a time (trial/error).
oh ok, just clarify things.
1. I just download the usbinjectall.kext & copy into the kexts/other folder right? no need to delete other kexts right?
2. Drop SSDT, means i need to delete the string in config.plist under ACPI/sortedorder? sorry still new with this.
 
oh ok, just clarify things.
1. I just download the usbinjectall.kext & copy into the kexts/other folder right? no need to delete other kexts right?
2. Drop SSDT, means i need to delete the string in config.plist under ACPI/sortedorder? sorry still new with this.

1. Correct.
2. Generally you don't have any files in ACPI/patched for installation, so SortedOrder has no effect. You can drop individual OEM SSDTs from the Clover GUI.
 
Status
Not open for further replies.
Back
Top