Contribute
Register

Direct Update to macOS Sierra using Clover

alright, i disabled the ports nothing, still the same, latest clover, i will try with 3726 and 3751. computer restarts after a little bit, never boots from USB
Upload your config.plist, remove your S/N and RtVariables section so I can take a look. What system definition are you using?
 

May be it is interst about CPU C-States Power Saving Modes (C1 C2 C3 vs..)
 
Upload your config.plist, remove your S/N and RtVariables section so I can take a look. What system definition are you using?
Here is my config. , the screen finally passes the apple logo without restarting, i used clover 3726 version this time using
 

Attachments

  • config.plist
    4 KB · Views: 227
Upload your config.plist, remove your S/N and RtVariables section so I can take a look. What system definition are you using?
I believe it will work now, I had a perfect El Capitan system, stable, but when i updated clover to the latest version as per the guide suggest, and started the installation, the computer restarted every time after the initial apple logo(process never started due to this), i tried to go back to el capitan partition, but the same problem occurred. So i formatted the SSD to start a fresh install. Same issue, until i read some post that i should use the 3726 clover version, i made the bootable USB with 3726 and now i am able to install from the USB, I will keep posted.
 
I believe it will work now, I had a perfect El Capitan system, stable, but when i updated clover to the latest version as per the guide suggest, and started the installation, the computer restarted every time after the initial apple logo(process never started due to this), i tried to go back to el capitan partition, but the same problem occurred. So i formatted the SSD to start a fresh install. Same issue, until i read some post that i should use the 3726 clover version, i made the bootable USB with 3726 and now i am able to install from the USB, I will keep posted.
Hopefully you'll be able to install. One thing I've noticed from your config.plist is that InjectKext is set to Detect and not Yes. This has caused many problems since El Capitan. MultiBeast installs to /L/E as Apple suggests for 3rd party kext. Let us know how you get on with the installation. This is one of the reasons MultiBeast and UniBeast hasn't been released.
 
I have installed Sierra on my Lenovo Y580, but when laptop reboots after installation i got this kernel panic. There's my "other" folder in attachment. I was only able to start the installation with these kexts and used kext injection + without caches.
Also I used latest clover. No matter what I put on my "other" folder on EFI, kernel panics. Please help.

Did you resolve this issue? I'm having the same problem with my 4540S.
 
Just a quick update after my Sierra install.
Audio is fixed and everything is rock solid, no crashes of any kind even Safari is stable.
For the heck of it, I did a quick geek bench 3, 64 bit. Here are my results :
El Capitan : 16851
Sierra : 16818
 
Hopefully you'll be able to install. One thing I've noticed from your config.plist is that InjectKext is set to Detect and not Yes. This has caused many problems since El Capitan. MultiBeast installs to /L/E as Apple suggests for 3rd party kext. Let us know how you get on with the installation. This is one of the reasons MultiBeast and UniBeast hasn't been released.
all working flawlessly :clap: hopefully ppl with my MOBO read this before attempting the guide. Use clover 3726, unfortunately i could not do a direct install from el capitan due to the latest Clover, which it seems to be the culprit here at least for my system.
 
Back
Top