Contribute
Register

ML on Toshiba Satellite® P755-S5262

Status
Not open for further replies.
Joined
Feb 21, 2012
Messages
6
Motherboard
Toshiba Satellite® P755-S5262
CPU
Mobile QuadCore Intel® Core™ i7-2630QM 2600 MHz Sandy Bridge (26 x 100) Processor
Graphics
Intel® Processor Graphics HD 3000
Mac
  1. iMac
  2. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. iOS
I Just finished a fresh install of Osx Mountain Lion on my Toshiba Satellite® P755-S5262 with UniBeast - Mountain Lion 1.5.3

Mountain Lion loads fine after boot but Audio, Wifi & Ethernet doesnt work

i understand that i need use MultiBeast - Mountain Lion 5.0.2 to enable drivers and solve it


Can you recommend me a configuration for Multibeast?? which boxes need be as marked to install with MultiBeast

My Specs
--------------
MOTHERBOARD
Toshiba PEQAA

PROCESSOR
Mobile QuadCore Intel® Core™ i7-2630QM 2600 MHz (26 x 100) Processor

CHIPSET
Intel® HM65 Express Chipset Family
Intel Sandy Bridge-MB IMC
Huron River

GRAPHICS
Intel® Processor Graphics HD 3000

AUDIO
Audio Driver for Intel Desktop Board
Intel Cougar Point HDMI

Realtek High Definition Audio
Realtek ALC269 @ Intel Cougar Point PCH - High Definition Audio Controller [B-2] PCI

WIRELESS (WiFi)
Intel® WiFi Link 1000

ETHERNET
Realtek PCIe FE Family Controller
(Realtek RTL8139/810x Fast Ethernet Adapter)

Host Controller
USB 3.0 NEC uPD720200

MEMORY
6GB DDR3 1333MHz memory

------------------

Thanks!!!

(excuse my english) !!!please!! open a Sub Forum by languages as before!! ;)
 
Hi,

Did you find any solution to your hardware issues?

I have a Toshiba Satellite p755-s5390 a very similar laptop to yours and I want to make a hackintosh. Is this possible? to make it works sound and wireless?

Thanks :beachball:
 
NEVER USE MULTIBEAST IF YOU DON'T KNOW WHAT TO INSTALL

Solution for Ethernet connection (Not need a kext installation)
What you need: Windows XP, Vista, 7, 8 (or whatever, you need CMD prompt)

IF YOU PREVIOUSLY INSTALLED A KEXT FOR ETHERNET, YOU'LL NEED TO REINSTALL MOUNTAIN LION, LION, OR SNOW L. (If you have a back-up for the original kext(s) just install those with Kext Wizard and Repair permissions, Rebuild cache)

Start Windows
-Connect ethernet cable (On Windows)
-Open cmd as administrator (if using W7 just Start > Search: cmd, right click, run as administrator)
-In cmd write " ipconfig/all " Enter
-COPY ALL Ethernet Adapter Local Area information. Save it on a text file (on USB), notebook, piece of paper or whatever
-Restart

Unibeast BOOT (or whatever you use)
Run in verbose mode ( -v )
Enter

Starting....

Connect Ethernet cable
Go to System Preferences > Network

Select Ethernet
In configure option select " Manually "

With the infromation obtained with cmd promt fill the information (on Windows 7)
-IP Adress (IPv4 Adress)
-Subnet Mask
-Router (Default gateway)

Apply

Now go to Advanced, Select DNS and click on ' + '
Write DNS number (obtained in cmd promt)
OK

Now go to Hardware tap and use this configuration: Configuration: manual
Speed: 10baseT/UTP
Duplex: Fullduplex
MTU: Standard (1500)

Ok, Apply and you'll have internet :)
 
Sound could work with VoodooHDA kext
For Wi-Fi there's not support
 
Status
Not open for further replies.
Back
Top