Recent content by zaidshb

How did you disable touchscreen USB port? One more thing, I have used freqVectorsEdit.sh script and in the "About this Mac" Section it shows i3 instead of i7, how to revert the changes?

I'm stuck at (Attempting System Restart... MACH Reboot) after applying this patch

hmmm this is strange. I don't know if this is gonna work but try this command directly in EFI Shell setup_var 0x18C 0x3

Download A03 then flash it. Use a tool of your choice to back it up and get what you need. If you want to revert back to A07 download it and flash it.

Dell says whatever they like to say but I did do it myself and I successfully flashed back to A1 and then to A7 again. secondly, I tried a lot of softwares and this is the only one that worked for me, please search the web you'll find plenty of them. (just type how to backup BIOS in Google)

If you can't take backup using this tool, flash an older version of BIOS (e.g A03) and try again

After using backup tools you should find a zip file on the desktop called "results". unzip it and there should be a file called (x32_bios-region_10.0.30.1072.bin) or something like that. now this is the file that you should use with Universal IFR Extractor. After that just follow the steps i had...

You can always refer back to Austere.J's post for info. 1. Use Backup Tools from this link to backup your Bios (Run it as administrator) 2. Use Universal IFR Extractor to extract the Bios. 3. Use UEFI Tools to look for the value of DVMT (as i mentioned in my case it was 0x18C) 4. Use EFI Shell...

Installing El Capitan on Dell Inspiron 7348 It worked and here's how: I'll write down the steps i made to get a working El Capitan on my Dell inspiron 7348 laptop for anyone have the same model and wants to give it a shot. I'll mention the steps one by one as much as i can and please always...

I have a working Win8.1 USB stick now so all is good so far I downgraded the BIOS to A01 then upgraded to A07 and luckily all Clover options were gone. it has been a great journey so far and i'm planning to do the whole thing again since i learnt a lot and hopefully this time will be much less...

yes I'm not a total noob, I understand how to do it luckily but the issue is it only appears as legacy and even I choose it I doesn't work. I've tried with Windows 10 and 7 on separate USB sticks. anything can be done from clover menus? I've learnt this lesson the hard way. so shall I try to...

hhhhhhh I was in a hurry excuse me. so I repartioned the whole SSD using disk utility then installed OS X just fine. then rebooted to install Windows but I couldn't find the option to choose Windows installer although I tried different methods. in this process I must have hurt OS X and the USB...

I ran into problems once again. I took the decision to erase the whole SSD and re-partition it using disk utility -> install OS X -> everything is fine. then i wanted to install windows -> rebooted and inserted the stick but it didnt appear in the boot list. i tried many times with different...

hmmm interesting, so Intel wireless cards are not supported by any means?

Just before i start installing i wanted to pay a huge thanks to you for your great help, thanks to you i'm now able to reach the install screen and i'll be on my way for giving it a shot right now.