Recent content by yossarian

Intel D975XBX2 (aka the Bad Axe 2)!

I bought the card 3 years ago and it did not cost me $100. Closer to $30-$40. The card's packaging was rebranded as something other than TI (although it says TI on the chipset). If they are $100 now, then you are correct in saying a $25 alternative is better and I lucked out in finding a good...

A few years ago, I owned two firewire cards. They had different chipsets, both made by TI. After running hard drive speed tests with XBench, I found that one of the cards ran at a considerably lower speed than the other. I found another card with the same chipset and purchased a replacement...

For my build with a Gigabyte GA-P55A-UD4P, I use the following... UserDSDT System Utilities > Repair Permissions Drivers & Bootloaders > Kexts & Enablers > Audio > Realtek ALC8xx > ALC8xxHDA Drivers & Bootloaders > Kexts & Enablers > Audio > Realtek ALC8xx > AppleHDA Rollback Drivers &...

What a difference a day makes. I thought I had unplugged all my peripherals, but when I checked this morning, there was one thing plugged in... my Digidesign M-Box 2. I unplugged it and voila, perfectly working audio. I had not installed Pro Tools or the M-Box drivers yet, as I was looking to...

I'm having very mixed results with ALC889 audio, using the same motherboard as the originating author of this post (GA-P55A-UD4P). My process of installation is as follows: 1) Install OS X Lion via the Unibeast method 2) Install Multibeast with the AppleHDA Rollback and ALC8xxHDA Kexts 3) Use...

No, my system is not overclocked. I have not tried this, but from what I know, P-States and C-States are supported by my processor. Dark Wake allows for one touch wake from sleep. As I mentioned in an earlier reply of this thread, all my problems went away when I removed the USB 3.0 kext...

After installing kexts from MultiBeast one by one, it turned out to be the USB 3.0 driver. No problems with my system and that next under Snow Leopard, only in Lion.

I am getting the following errors in the console: 11/18/11 12:24:28.294 AM com.apple.locationd: ERROR,Time,343297468.294,Function,"_Apple80211* CLWifiService::createApple80211()",Apple80211GetIfListCopy failed, error -3903 (Unknown error: -3903) 11/18/11 12:24:28.294 AM com.apple.locationd...

Can you go into a little more detail about the option you are talking about? I'm assuming this has something to do with the CMOS settings. Are you talking about an overclocking setting? I have my BIOS set to the recommended Lnx2Mac settings found on his blog -...

I am running 10.7.2 and have been struggling to get all the sleep issues ironed out. I am using a custom DSDT (stock from this site with an edit for my graphics card). I have patched the AppleRTC for the CMOS fix and am using darkwake=0 in my boot plist. Sleep works, but does not always...

I highly recommend looking into a guide on how to edit your DSDT to include your graphics card information. It's been so long since I edited mine that I can't remember what guide I used. Search this site, I'm sure you'll find one. The one important thing to know is that when I upgraded to...

I have the same card (1GB version) and have no issues with the DVI output. What methods have you tried? I have my DSDT edited and no graphics enabler in the boot loader. Have you tried a custom DSDT? Works great in Snow Leopard. In Lion, I am still ironing out the kinks, and am unsure if...

I've spent the whole weekend trying to update my computer to 10.6.8. First it was working around the PCI configuration begin problem. Once I solved that, I lost my display ports on my desktop. I have searched far and wide on a solution, but to no avail. After the computer boots up, the...

Re: JMicronATA.kext Not Needed for eSATA or GSATA on Gigabyte Is there any update on the Marvell 9128 kext from MacMan? It has been approximately 3 months since the last post on this thread and about a month since MacMan mentioned it in the comments section of his blog regarding the JMicron...