Recent content by XDAN

iMac Retina 5K, 27-inch, 2019 3.6 GHz 8-Core Intel Core i7 AMD Radeon RX 580 8 GB 32 GB 2800 MHz DDR4 OC 0.8.5 All Kexts updated to the latest version Had issues with the sleep followed the official oc guide and reapplied those settings sudo pmset autopoweroff 0\nsudo pmset powernap 0\nsudo...

WoW that are good news. Thank you @matksr! I suggest to do the SSDT stuff via Linux. So you not need to fiddle around with USBInjectAll. Also, you do not need to do this - you have the same mainboard then I with the same bios version. Based on that my files should work without any modification -...

Stay focused. 0.65 - When you update the OC, you do not need to edit the plist. Just replace the files with the new ones. Create the serials and replace them inside the plist. Create the USB install stick as described by dora. Try to install the OS If the install stops - collect the logs and...

Hi, I'd attached my actual OC configuration. Please try the attached config. plist. I removed the serial numbers and replaced them with a CAPITAL WORD. Reverted to your SSDTs (Side question here: what is the SSDT-HPET for? -> Frankly I don't know. Those are the files that the tool had created...

I simply can not get the OC-installer USB to boot correctly. After choosing "Install macOS…" in the OC-Bootloader it get's stuck very quickly on some ACPI related errors (see image Attached). https://www.tonymacx86.com/threads/solved-installation-stuck-acpi-error-ae_not_found.247400/ -> may...

I’ll come back to y. We will find a solution.

I'd updated via Bios / Internet connection the BIOS last week. The BIOS settings gone back to the defaults, first I did not recognised this - because the OS was booting without any issue. Applied after a reboot the recommended on.

- I suggest to perform a Clean install to a SSD / HD - Backup the Clover EFI files - Create a small (10GB) FAT partiion - To exchange data or to easliy restore a working EFI - Transfer and access files between Linux and OSX 1. Creat a linux Mint Boot Stick - Disable inside the...

I did a clean install. To be frank, the dort. is a excellent starting point-if you spend time to understand the process this will be a big plus for the future to maintain your config. As said, I do not have any big issues with OC. Everything is working even with the wrong and default bios...

Did that as well, no big issues so far. DRM is known to be brocken. Someone interested how I did it ?

hi, boot via usb stick into mint, create a via SSDTTime the aml files. Copy the files into the corresponding folder. Done

Thats the output of my boot. I saw some minor issues... but as I said, the system is stable 0:100 0:100 MemLog inited, TSC freq: 3600506760 0:100 0:000 CPU was calibrated with RTC 0:100 0:000 0:100 0:000 Now is 26.03.2020, 06:35:43 (GMT) 0:100 0:000 Starting Clover revision: 5104...

ok what chip set ? Could you please follow my suggestion ?

Ok, your configuration ist not the same then my or did you also replace the wlan module ? --> WALN / BCM94352Z; AC 40Mhz is working - 80Mhz sometimes / If you do not replaced the wlan module. I suggest to disable the wlan+bluetooth module / remove all bcm* kex and still use the rest of my EFI...

I applied the same bios settings like pastrychef. I'm googling a solution to dump the bdmesg output onto the usb stick that you use to boot. Without any success till now. If we get the log output that would be super helpful. Without a log we are blind. May there is a guide somewhere we can use.