Recent content by warthoggraphics

Same here please, Ive been trying for 6 months to get an ASUS P9x79 Pro working and finally binned that Motherboard and have replaced it with a GA-X79-UP4, but cannot get this to boot from the drive at all? I manged to get it installed using npci=0x2000 cpus=1 -f but even using the same flags...

OK, now getting in a real mess.... Just received a new GA-X79-UP4 Motherboard and after getting it to boot I am back at square one... Still unable to boot at all from my original disk, the best I can get is a grey screen with the apple logo, I can however get it to boot from the USB and...

Yep, tried this, still no joy, I also tried another motherboard that a friend had that is the same make and model, much earlier BIOS, and this also would not boot from the old drive. I have since tried a new drive as well till the new motherboard arrives, and under both of the ASUS boards I...

Don't blame you, I really hate ASUS lately, would not mind but also there support is totally rubbish here in the UK, at least you can call the local Gigabyte office up and have a chat with someone... Serves me right though for watch rubbish videos on YouTube that said that the ASUS was a...

I am having a real hassle with an ASUS P9x79 Pro Motherboard (BIOS: 4607) The system was booting and running OK until one day I switched the system off as I needed to move it (The system runs for weeks normally as I use it to render my Autodesk Maya projects). After this it would not...

Ive been trying to get an ASUS P9x79 Pro working since Late 2012 and its been the biggest waist of money I have had, I managed to get it working just last week, but then after switching off the system and switching it on again it died, then replacing the motherboard has put me back to square...

Thanks for the recommendation, I have just ordered one from Amazon. In the meantime I managed to get another ASUS P9x79 Pro off a friend who also had the same problems as me, in that he could never get a working install of OSX to run on the thing so I have borrowed this till the Gigabyte...

I just about managed to get a system running, been trying since October 2012 and for some unknown reason I could not get a reliable build until recently, and having enjoyed having a nice system with loads of RAM was really great for Autodesk Maya and it worked so much better under OSX than under...

Tried the easy fix, does not work! I am sure I did try the GraphicsEnabler=No, but will try it again, even though I have now removed this from the board and I am trying to get it running just using the internal video card now, still having same issue though!

Same Build here except for the video card, where I choose the Nvidia GT640 due to cost. All I get on boot is: boot0: GPT boot0: test boot0: test boot0: GPT boot0: test boot0: test boot0: error Any ideas, followed your guide exactly but cannot get the system to boot unless I select...

I have now been at this for days and still cannot get this to boot at all, I have tried loads of different things but the problem is just strange! First off: I have set Multibest up to do what I think is correct for my Motherboard and Other Hardware, it is what was there before Mavericks and...

Thanks for the help, but it did not work for me. If I edit the file that you mentioned and then reboot the system, all I get is a black screen instead of the login prompt. If I type in the same as I entered in this file at the chimera screen everything boot OK. So there must be...

My ASUS P9X79 system has the same issue, but I can bypass this by Typing npci=0x3000 at the Chimera screen every time I boot, is a pain but it looks like there is not a fix for this in the present Multibeast!

I am not sure if mine is related in any way but I have 5 HDD's and 1 SSD in my system, but I only get the 1 SSD (Boot Drive) and 1 HDD when Mavericks loads, none of the other drives on my system show up.

Thanks for this, but where do I find the chameleon boot plist ???