Same here. Stork build i5 in 2012, HP 8300 i5 in 2017, M1 Mac Mini 2021!
This forum is a treasure and I owe alot of my success at Hackintosh to the contributors here. That said running an Apple M1 is an amazing experience, it's ridiculous.
My Sierra 6300 system has been working well for years but lately it will not recognize my SSD HD (if I open Bios, the drive does not show up)... If I keep restarting the machine eventually it will show up and Clover will start and it will boot up as normal.
This all seems to have started after...
I got everything installed and running. Easiest and cheapest Hackintosh I've ever done. Very fast too.
One problem is that my resolution is stuck at 1028x768 with my GT 710. I *think* I have all the correct settings in Multibeast and Clover, I've redone it several times and even installed the...
I'm jumping on the HP 6300 i5 bandwagon. Got one of the $100 ones you posted. Thanks!
I ordered this GT 710 off of amazon. Do you know if this will be plug and play with Sierra? It says max resolution of 4096x2160 (Is this right?)...
I had the same problem but I always have a backup SSD with my old system on it. I just booted into Mavericks and then ran Multibeast, did a "save" then "load" into the new SSD with Yosemite.
This got me past the "PCI Config" problem but I then had Kernal Panics when Yosemite was loading...
Once I used those commands to be able to boot then running multibeast with storks settings (plus 32 bit boot screen) worked for me. It's booted fine ever since.
Re: Guide: GA-Z68X-UD3H-B3 with ATI 6870 - Clean Lion Install
I've got some basic questions about this mobo (I'm trying to understand all of this)...
I understand that I have four 6Gb/s SATA ports and three 3Gb/s ports. Can I just use any of these for my mechanical HD's or should I use the...
Are you getting to the Tonymac boot screen? If so hit the space bar to stop the boot and type this:
-x -v BootCache=No GraphicEnabler=No PCIRootUID=1
This will at least get you verbose booting to see where it hangs.
Re: Stork's Sandy Bridge Z68X-UD3H - i7-2600K - HD3000 - Lion
Another dual monitor issue: I've got 2 HDMI only monitors. The main one is connected straight via HDMI with no issues. The second is with a DVI (from mobo) to HDMI cable. My system hangs during boot (before the white apple...
I was having lots of issues with Lion booting. My problem was the boot0=error due to the new hard drive 4k sectors issue. I could boot from unibeast but not from the HD. I fixed that then set multibeast to 32bit boot screen. Something worked cuz now I can boot no problem.
I wanted to do a quick note of thanks to this forum and Tonymac for making this all possible. I'm going to do a user build post later.
Today I built up an 8GB i5 2500k system with an GA-Z68X-UD3H-B3 mobo. I probably spent 6 hours trying to get it running today... here is what I learned:
Make...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.