Recent content by vasman

Tried everything but just wouldn't get past initial booting, the bios was a nightmare more setting than I've ever seen in 20 years & there manual was non-existent (one page) but thank's for the reply. Best regards

Guys, hoping someone can give me some guidance. Purchased a ERYING Mother Board M-ATX HM570 with a soldered in intel 11th Gen i9 CPU in & Tiger Lake chipset. Ive read that the inbuilt graphic aren't supported so, but this does have a PICE slot and you can disable onboard graphic. My question is...

My own hardware hasn't changed, to that already listed. So little surprised to get this response, especially as I was just asking a question about and old board that was compatible.

Hi Folks, was given a brand new Asus Z97-A mother board with Compatible Intel Xeon Chip, but given its age I wondering if its still able to run, and what would be the suitable boot config or anyone had a working EFI

Follow the basic firsts, remove all hardware & memory. Boot first with memory (normally bios speakers will beep in a certain way giving you an indication of the fault then look at the manual or your system may have LCD which posts a number ). Default the bios, worse case remove the bios battery...

Hi Guys, After doing the security update, i reboot after completing the update and ended up with the following, anyone an quick fix idea OCS: no scheme for SyncTables at 5 index, context <Quirks> ! OCS: NO Schema for CustomKernal at index, context <Scheme> ! OCS: Failed to calculate size of...

I'm new to open core, but I'm getting my head around most of it with the exception of an audio problem. AppleALC kext is loaded with the latest release. But I just can't seem to be able add the ALC221 codec. I have follow the guidance on amending OpenCore installation page. But can't find the...

Yes always and hope MacMan recovers to full fitness, these have been difficult times for all of us around the world. But it's good news that things are on the up. OpenCore instructions as said earlier and are not easy to follow at all. Thanks for the update look forward to the results.

It been very quiet of the new MacOS front on here with no new guides using the traditional methods of installing the new OS, is there going to be a new UniBeast for the big S and multbeast for once it's finished? OpenCore is vastly different and instructions are not for the faint hearted as...

Glad you got it working, I've only just pick up message. I can send you anything you need if you still having problems still.

Followed the guide from RehabMan, his guide worked for me with some adjustments but don't give up, but its an obsulute must to remove all the HP standard Bios settings. Without that you'll run into problems, also change the the Wifi-blue tooth card for an apple compataible, had to order it from...

Look for the Asus bios patch

The issue relates to a bug with the bios with the motherboard, which took me to others sites where I found out the answer. The SSDT-EC.aml I posted was generated from for my board using the tools, https://www.tonymacx86.com/threads/a-solution-of-asus-new-bios-ver-2012-not-downgrading.273151/

After a lot of routing around here and from other sites, finally I got a fully working system. Never got the install via Unibeast 10.1.0 to work despite the guides and adding suggested patches. But, MultiBeast 12 worked perfectly. There was a lot more patching to do.

Catalina Build 10.5.4 I’ve taken the time to purchase and upgrade my current system whilst in locked down in the UK:banghead: : Purchasing the recommended equipment from the ™-website. I followed the instructions as per normal downloading appropriate Catalina Mac OS 10.15.4 using UniBeast...