Recent content by valanov

@shehzadpir happy for you if everything is ok :)

Have you tried with SSDT-EC.aml

Dont touch anything there man. Upload your actual EFI folder it’s better. You said it’s working under Windows 10 right

Very strange. To correct what i said earlier, the reboot was on battery as when plugged. Something to note is i had installed SSHFS on Catalina which i havent in Mojave. Everything is smooth now on Mojave. Just need a dw1830 card and then this build will be 100% fonctional.

I got I2C elan trackpad too so use voodooI2C with the voodooI2CHID satellite too. In tandem with voodoops2controller which is for keyboard in my setup I presume. Asked cause just with voodoops2controller keyboard should work and basic track pad too. I tried without and put it back. You need...

Cool ! You are welcome. You have sound over hdmi working after reboot ?

I had same problem on Catalina. Downgrade to Mojave fixed it. I would like to know too. Apart this everything was smooth on Catalina

Here it is. I don't know why but today no HDMI sound sadly. weird

I use the same plist. Try to change ig-platform-id to the same as device-id. I changed mine to 00001659 from 00001b59. Device-id is preset to this strangely (16590000) Then if you're lucky and after reboot of course you will see the image all purple on your HDMI output. From there you can...

I solved the issue by changing ig-platform-id then the HDMI screen was purple but no reboot. So I could identify the connector and enable it accordingly. The thread : Need help with HDMI output

You might need to change ig-platform-id to stop the reboot issue. Then you will be able to see the HDMI connector and patch it accordingly. I had same problem til I solved it yesterday. The thread : https://www.tonymacx86.com/threads/need-help-with-hdmi-output.287923/

Hi Do you use voodoops2controller.kext ?

Problem solved or partly solved! I edited ig-platform-id and enabled the good connector which I could see after changing ig-platform-id. The pc didn't reboot but purple screen. Enabling good framebuffer connector and type (was DP on this port). Now its working with no sound. and the colors are...

I tried some things with Hackintool and this guide : https://www.tonymacx86.com/threads/guide-general-framebuffer-patching-guide-hdmi-black-screen-problem.269149/ But nothing and boot time is so long now I replaced the backup of config then I know there is something about Framebuffer and...

Yes I tried it with Catalina and not working. Hackintool Framebuffer patching go till 10.14 that's why I guess. Thanks for your reply, I go to try it on Mojave.