Recent content by ultraflynn

I've just upgraded to 5125 and I'm seeing exactly the same issues. EXITBS:START hang.

It just worked in my installation. Only USB 2 though, unless I unplug it and plug it back in again. Only then does do USB 3.

I've done a massive amount of digging around this but I'm at a loss so seeking help. I have a Benq BL3200 monitor which has a Genesys Logic, Inc. USB 3.0 card reader on it. I have mapped all my USB port very successfully and my build is working perfectly apart from one issue. When I first boot...

I've been having issues with sleep/wake ever since upgrading to Catalina. Mojave worked perfectly. Initial problem (which I think may help you) is that it would sleep but on wake the fans would run at full forever and the video didn't work. I recently spent some time cleaning up my kexts...

I've been putting up with slow boot times forever on the assumption that it was just the way it way. With debug turned off in Clover my boot times are now measured in seconds not minutes. Thank you so much.

Smoothest upgrade yet. Usually upgrades causes me to press the reboot button a few times, run verbose mode on startup and be very patient. This time though to problems whatsoever. I did upgrade my system recently to the latest version of every kext I had installed and also got Clover fully...

Can you confirm that you are getting hardware acceleration since switching to the RX580?

Need advice on a couple of things Anyone?

Need advice on a couple of things Generally my Hackintosh is working brilliantly and that wouldn't have been possible without this excellent site and the resources on it. I have two problems that I'd like to get some advice on. 1/ Sometimes, very occasionally when I boot up my Hackintosh I...

You guys are amazing. :) Now that I can get back into OS X the Mac App Store now works as well. Excellent. Righty, on with the build again.

From the look of the output I posted earlier the issue appears to be with PCI set up so I went with the suggestion to move to integrated graphics. Switching to IGFX, enabling Intel GPU and moving the HDMI cable from the GTX 760 to the motherboard allowed OS X to boot. -v option showed lots of...

I agree. That was my plan. MAS is unavailable though. I get a nasty message. I'll screenshot it next time I rebuild but that a lengthy process. I've just booted the system from iBoot and then selected my Snow Leopard disk using -v as the option and got the following output:

Sorry, forgot the graphics card, it's an EVGA GTX 760 OC. I'm not using any flags on either iBoot boot. And -v is of little use because the console quickly flashes up with some lines and then just goes black. Text is on the screen for under a second. Here's the sequence: Boot up using iBoot...

Here's the hardware spec: Intel i7-4770K Gigabyte GA-Z87X-UD4H Kingston 120GB SSD V300 Corsair Air 540 Case Corsair CX750M PSU G-Skill 8GB (2x4GB) 2133GHz Apart from the memory everything else has (or was) on the recommended hardware list from tonymacx86. I've done multiple installations...

Thanks. I'll list the spec later and and describe what I've done so far. Do you know of a step by step guide to installing Maverick from scratch on a Haswell build?